1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

1970 tail light pieces

Discussion in 'Parts for sale' started by cole, Jul 26, 2021.

  1. cole

    cole Platinum Level Contributor

    tail light wiring harness $25
    rear sill rubber strip( it goes along the pinch weld between the lower trunk lip and bumper) with bolts, The screw holes have pulled through and would need small washers or larger head screws to re attach or used as a template for a new one. Also a pair of license plate rubber bumpers and a ratty corner rubber $15
    3 tail light housings. All the sockets are in good shape $20 each or $50 for all three
    1 chipped lens $7
     

    Attached Files:

  2. Dano

    Dano Platinum Level Contributor

    Would you go $75 for everything? I'll take the rubber lot for $15 regardless - Add it to the other stuff.
     
  3. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Dano, can I please buy the rubber strip off you if you get it?
     
  4. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    In line jusssssst in case for

    “rear sill rubber strip( it goes along thepinch weld between the lower trunk lipand bumper) “
     
  5. nitrousfish

    nitrousfish Dave Fisher

    I could really use that lens. Fingers crossed
     
  6. Dano

    Dano Platinum Level Contributor

    I was only going to use it as a template - Haven't even checked to see if any of my cars still have one.
    I don't need the lens per se. @cole has some other stuff for me & I figured I'd just make an offer on everything since he was already shipping stuff to me. Probably still cheaper to have him ship me everything & then send you the lens.
     
    STAGE III likes this.
  7. nitrousfish

    nitrousfish Dave Fisher

    Any way is fine for me. I’m on no rush, I happened to score a glass bumper at the nats amd it had one lens in it. Let me know. Thanks. Fish
     
  8. nitrousfish

    nitrousfish Dave Fisher

    Anything happening with this? Thanks
     
  9. cole

    cole Platinum Level Contributor

     

    Attached Files:

  10. cole

    cole Platinum Level Contributor

    I just have to get everything itemized up for Dano and go from there.
     
    Dano likes this.
  11. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    I’d still like the intact rubber strip however this plays out please.
     
    Dano likes this.
  12. nitrousfish

    nitrousfish Dave Fisher

    Kool beans
     
  13. nitrousfish

    nitrousfish Dave Fisher

    Any word on the taillight lens? Thanks
     
  14. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Nothing but crickets, think we are in the Twilight Zone……:eek:
     
    Dano likes this.
  15. nitrousfish

    nitrousfish Dave Fisher

    Lol John
     
    Dano likes this.
  16. Dano

    Dano Platinum Level Contributor

    PM sent
     
  17. nitrousfish

    nitrousfish Dave Fisher

  18. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

Share This Page