1971-72 Skylark GS Factory Air Conditioning-- Complete and Working GM Setup.

Discussion in 'Parts for sale' started by mrskylark71, Oct 13, 2020.

  1. mrskylark71

    mrskylark71 Well-Known Member

    1971-72 Skylark GS Factory Air Conditioning-- Complete and Working GM Setup.
    Before I start parting out this setup-- would like to see if there is interest in the complete package.
    This parts car has 61,000 original miles. It was originally equipped with Factory air-conditioning that was functioning when removed a week ago. This will fit and is correct for 71-72 350 and 455 motors. Will also fit 1970 models. Picked up only in CT 06451

    Setup consists of : (from front to back)
    Condenser with mounting brackets and dryer
    AC lines-- low pressure, high pressure and muffler lines
    Waterpump, crankshaft and alternator pulleys
    7-blade clutch fan
    Frigidaire compressor
    All compressor mounting brackets and bolts
    Harrison outer evaporator box with POA valve, blower motor and fan resistor
    All AC engine wiring with relay
    Water valve
    Firewall vacuum reservior
    Inner evaporator box under dash w/ heater core
    RH fresh air vacuum actuated vent
    AC dash controls and heater cable
    All vacuum lines under dash
    All AC air ducts underneath dash
    Firewall section (cut out) where inner and outer boxes meet

    $1000 as a package. Please email ros6872@hotmail.com or call 203-651-9990 or PM.

    I have lots of nice 70-72 parts--www.ros687parts.com
    Please contact me with needs

    Thanks for looking!
     

    Attached Files:

    Last edited: Apr 28, 2021
  2. BennyK81

    BennyK81 Well-Known Member

    If noone wants the whole setup I am interested in the hoses...
    only if you ship overseas though
     
  3. FLAME ORANGE GS

    FLAME ORANGE GS Founders Club Member

    if you would ship this i would buy it.
     
  4. Rocket Racer

    Rocket Racer Well-Known Member

    FWIW, Fedex has a "crate box" which is a very heavy cardboard box that attaches to a pallet. I've used it to ship a large quantity of steering gears from Florida to California, as well as a complete H/O interior across country. Flat rate pricing based on distance. Two sizes.
     
  5. Dano

    Dano Platinum Level Contributor

    Paul, different topic but does that car happen to have (or do you have otherwise) a really nice dash bezel w/o woodgrain? Thx.
     
  6. newmexguy

    newmexguy Well-Known Member

    Recently sold and shipped Paul T a small jack part. A very courteous and communicative individual, I would recommend.
     
  7. mrskylark71

    mrskylark71 Well-Known Member

    Thanks Dave! He is an awesome vendor-- highly reccomended
     
  8. Mike Sobotka

    Mike Sobotka Founders Club Member

    Where are you located in Connecticut? Dammit. I was just through there.
     
  9. mrskylark71

    mrskylark71 Well-Known Member

    Added firewall section (cut out) that is in-between inner-outer evaporator boxes. If your car had no AC from the factory, you have everything you will need to have a correct factory setup. Only other parts needed will be an AC dash pad with center vent and AC interior kickpanels
     
  10. Chuck George

    Chuck George Well-Known Member

    Picture of fan and clutch if your selling separately and will ship.
     
  11. mrskylark71

    mrskylark71 Well-Known Member

  12. mrskylark71

    mrskylark71 Well-Known Member

Share This Page