290h cam, lifters, and adjustable push rods. Used

Discussion in 'Parts for sale' started by rus, Jan 17, 2021.

  1. rus

    rus Well-Known Member

    For sale for the 400-455 motor is a used ta 290h cam with lifters and adjustable push rods. The lifters are set in order of removal. I bought this set last spring and not going to update my car now. The front oil groove was filled in by previous owner and he ran the rear oil cross over. His car ran great with this setup with no issues. $200 plus shipping. 6F53380C-6942-4194-9EC6-11796EA0E734.jpeg 464F98A3-9A4A-4C81-8D42-39E9176ABE5C.jpeg 065C18AE-C6E0-42BD-A262-77F3BEC4A1D1.jpeg F5E76E84-BE39-4F43-B929-73058F75384E.jpeg 8BA95FFE-2204-4778-8236-34EA82E981C2.jpeg
     
    STAGE III likes this.
  2. 436'd Skylark

    436'd Skylark Sweet Fancy Moses!!!!!

    FYI- this cam has taken my car deep into the 11s and is real friendly on the street. If my rear suspension was better I'd be going 11.0xs....
     
    STAGE III likes this.
  3. Landshark1969

    Landshark1969 1969 GS convertible

    Will this cam work without the oil mods?
     
  4. rus

    rus Well-Known Member

    Myself, I would not run without the rear cam bearing change or the rear oil mod
     
  5. Super Bald Menace

    Super Bald Menace Frame off oil changes

    Wouldn't the TA dual back grooved cam bearings negate the need for the channel in the front cam journal?
     
    dan zepnick likes this.
  6. rus

    rus Well-Known Member

    Yes, I believe it would. Same as for a roller cam set-up, to my knowledge
     
    Super Bald Menace likes this.
  7. 1969RIVI

    1969RIVI Well-Known Member

    Are you willing to sell the adjustable pushrods separately? If so PM me please. If not GLWS.
     
  8. rus

    rus Well-Known Member

    Pmd
     
  9. chris4554

    chris4554 Well-Known Member

    Interested the whole package, let me know if it gets to me.
    Would like a good picture of the distributor gear
     
    Last edited: Jan 18, 2021
  10. rus

    rus Well-Known Member

  11. Sebambam

    Sebambam Well-Known Member

    interested in pushrods if it gets to me
     
  12. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    3rd on pushrods
     
  13. chris4554

    chris4554 Well-Known Member

    PM sent
     
  14. rus

    rus Well-Known Member

    Sale to chris4554 pending
     

Share This Page