68 skylark HVAC control plug

Discussion in 'The Big Chill' started by Rich Skylark, May 1, 2015.

  1. Rich Skylark

    Rich Skylark Gold Level Contributor

    Not sure what small 2 prong plug is opposite side of blower switch is for ? It connects to another plug with a green and lt brown wires that go up & into the firewall. Replaced vacum lines and pretty sure I have a bad blower switch.Any input as always is appreciated 061.JPG 060.JPG
     
  2. Briz

    Briz Founders Club Member

    Not sure, but I would put a meter on the prongs and flip the switches until I get a reading. at least you will know what settings make the connection. If you get nothing across Id say the switch is bad.
     
  3. Rich Skylark

    Rich Skylark Gold Level Contributor

    A picture of the plug end of the wires; 2 light brown & a green wire , will check for power tomorrow. 004.JPG 003.JPG
     

Share This Page