71 gs h/t

Discussion in 'Car Part-Outs' started by StratoBlue72, Aug 5, 2012.

  1. StratoBlue72

    StratoBlue72 Well-Known Member

    Original 350/350, lime mist on black, bucket/console, tilt, F-41, 3.08 posi. Now basically a skeleton with no front end. Interior mostly gone, seats gone, frame gone. I'm keeping the 3.08 posi, tilt column and console. Still have the numbers matching engine and transmission and build sheet.
     
    Last edited: May 26, 2013
  2. Drillbit

    Drillbit Gold Level Contributor

    Got a rear sway bar and boxed lower control arms?
     
  3. BrunoD

    BrunoD Looking for Fast Eddie

    If he does not have that,I have one original set of boxed control arms and the sway bar.If interested,PM me.BrunoD.
     
  4. StratoBlue72

    StratoBlue72 Well-Known Member

    I already used that on one of my cars, sorry.
     
  5. 70buickboy

    70buickboy Well-Known Member

    I'm looking for the console lid, and / or the chrome insert. Would you part with just the lid? Thanks. Mike
     
  6. StratoBlue72

    StratoBlue72 Well-Known Member

    The console is in really nice shape, so I wouldn't be able to part it. I was going to keep it for my 72 Stage 1 coupe project car, but am thinking of re-powering the car with an LS-3 and a 6 spd. manual.
     
  7. bpwwer

    bpwwer Member

    I'm looking for the front windshield pillar post trim - passenger side. Do you have that?

    Bob
     
  8. 70buickboy

    70buickboy Well-Known Member

    Thanks Tim, I did find a Repop from Tamraz's, so i will go that direction.
     
  9. sjb89

    sjb89 Silver Level contributor

    Do you have a non a/c dash pad?
     
  10. Matt Knutson

    Matt Knutson Well-Known Member

    I may still have one if Tim can't help you.

    Matt
     
  11. TimR

    TimR Nutcase at large

    I could use the low horn off that car if you still have it...thanks
    Tim
     
  12. StratoBlue72

    StratoBlue72 Well-Known Member

    Still have it, and as far as I remember in really nice shape.
     
  13. calilark72

    calilark72 Well-Known Member

    Hey interested in pass front fender pass door pm me
     
  14. Nascarnie

    Nascarnie New Member

    I'm looking for a hood with scoops. You still have the GS hood?
     
  15. StratoBlue72

    StratoBlue72 Well-Known Member

  16. jeffpye

    jeffpye Well-Known Member

    I'm curious to know if you have any headliner bows and clips?
     
  17. buicksstage1

    buicksstage1 Well-Known Member

    Where did your add go for the 70GS roller?
     
  18. StratoBlue72

    StratoBlue72 Well-Known Member

    A guy came thru and picked up what was left of the 70 GS.
     
  19. gs_jimmy

    gs_jimmy Well-Known Member

    How's the filler panel above the trunk lid?

    Jim
     
  20. StratoBlue72

    StratoBlue72 Well-Known Member

    That panel is bad, but I believe AMD makes a good repro.
     

Share This Page