Available New Reproduction Parts from The Parts Place

SKY69- DAVEEEEEEEEEE :TU: :TU: :TU: :TU: :beer :beer :beer
About time you came back to the board..... :blast:

 

Have you got 1/4 skins for a 68/69 GS convert or will the ones you have work for HT and converts and how much to ship an order to Alberta Canada if you do

thanks in advance

Ken

 

Shane, Who makes your Rallye Rims? Are they made in house or from a vendor.

I need 2 15-8 and need to know the backspacing. Is it 4 1/2 inches?

Thanks

David

 

How about "thinking" about doing a set of rear 1/4 window trim for 73 GS cars???We are always being left out...It goes from 70-72 to 86 GN and up. I haven't seen many 73-75 GS cars that couldn't use a set of these pieces.
Pat

 

I'm with Pat I could use 3 sets

 

Do you guys sell just the flat plastic lens' by themselves?

 

Shane,

Do you have an inner fender patch kit for the LEFT side? I've found several sources for the right side, but so far nothing for the left.

Thanks!

Jay

 

Idea

Shane, I am a machinist and Mold-maker.. Most of the people on this board have no Idea the time and effort it takes to make a mold that size..Just to get it running and flowing like it is suppose to is a feat in itself..There has been alot of people on the board concerned about some problems with the new 71 GS grill..(by the way you don't have a picture of it in your new products page). Anyway they are complaining about color and some of the fit problems..I see there are some problems with some of the other parts you have put out before..Here is my sugesstion..Scince we have over 10,000 members on this board all looking for certain parts, how about when you are ready for production on these parts, That you ask some of the members Either from this Board or from your members list on your web sight, to try these parts out for fit and How close they are to the original specs.???? I think there are some really repuitible guys on here with great feedback who would be happy to do it for you..(like Jim Wiese and others like him who have alot of NOS stuff they can compair it to)...I don't think it would be a Solve all solution but it would probably save your company Thousands of dollars in unwanted spending by not having to take parts back..I would also put my name into the hat for checking pats for you!!!! :TU: By the way I have emailed you and I just want you to know that I think regardless of what all the whining is about I think you have alot of CLASS sticking around and putting up with the good and the bad feedback your company has taken over the years.. Your products have come a long way!!!! Thankyou for all you do for us and Keep up your strive to get better in your reproduction parts!!!Randy :TU:

 

I think it would be far fetched to say these "so called whiners" don't have a reason to be unhappy with their parts. Not every person knows what it takes to put a part on the market but not everyone out there is going to be happy with the product everytime, even if they spent ten years making it. You can't make everyone happy. That is what return policies are for.

 

Your Right Andrew I was caught up in a moment!!! I think a trial would be a great Idea though.. I reviewed and changed my prior post.. Thanks Randy

 

Shane
I need a 1970 GS 455/Stage floor shifter /console Turbo 400 shifter cable.
The pic posted on this thread shows cable ends with an eye loop on trans end of cable which is correct for Turbo 350 GS 350 application however is not correct for 1970 Big Block GS cars.The cable should have no loop on end just straight cable so it can slide into shfiter block that screws on to end of cable.
Is the pic shown what I will receive ?

 

Rich, this is a 3 yr old thread, you may want to call or email them directly.

 

Bring on the '69 stuff...I'll be waiting with credit card ready. Have had my car waiting in the wings for years waiting for rear inner and outer sheet metal to come out. :beer