Cant say enough about Ken's carb - made almost 600 hp

Discussion in 'Everyday Performance LLC' started by 87GN_70GS, Nov 25, 2020.

  1. 87GN_70GS

    87GN_70GS Well-Known Member

    Am very pleased with my Everyday Performance prepped 800 cfm qjet. Cranked right up straight out of the box. Idles just perfect, didn't even adjust the idle mix. Handled the 7.5 psi dyno pump's fuel pressure just fine. After a few pulls and changing the sec rods to AX and opening the air door to 1.240" it made 586 hp and 603 ft-lb, only 9 hp behind a Holley 950 HP ultra. The dyno operator who only does race motors was blown away (he initially looked at the motor and said "what's it gonna make, about 440 and be all done by 4800 rpm?)
     
  2. techg8

    techg8 The BS GS

    Awesome!

    Thanks for the Dyno report and feedback!

    Smokin tires
     
    87GN_70GS likes this.
  3. BuickGSrules

    BuickGSrules Gold Level Contributor

    Qjet´s work if they are done properly. Nice numbers.
     
    techg8 likes this.
  4. sean Buick 76

    sean Buick 76 Buick Nut

    Thats great! His carbs are awesome
     
    techg8 likes this.
  5. Briz

    Briz Founders Club Member

    the 3 Ken did for me are perfect
     
    techg8 likes this.
  6. PaulGS

    PaulGS Well-Known Member

    Everyday Performance (Ken) is A+ on everything he does.

    Top notch in every way.

    I had him rebuild a Q-jet. Installed it on the car and it would not idle.

    Called on a Sunday for tech help and he picked up the phone!

    Quickly diagnosed the issue as a bad base gasket causing a massive vacuum leak.

    Ken is my #1 guy for carbs and distributors.
     
    Kingfish and techg8 like this.

Share This Page