1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Dealing with Jim at Tri Shield

Discussion in 'Tri Shield Performance' started by stubnosebrock, Apr 22, 2013.

  1. stubnosebrock

    stubnosebrock Well-Known Member

    I just wanted to write a note so anyone looking to do business with Jim Wiese has some more feedback. I ordered a set of custom Diamond pistons for my 430 through Jim. The wait has been longer than expected, because of how busy they are. Nothing to do with Jim. They should be here in the next few days. Dealing with Jim has been fantastic. He helped me through all the steps of getting the right pistons for my application, and is never too busy to talk to me when I call to bug him because im anxious to get them. He is extremely knowledgeable on Buicks, and we are lucky to have him around. So thanks Jim, you are the man, and if anyone wants to do business with Tri Shield... DONT THINK TWICE! Brandon
     
  2. austingta

    austingta Well-Known Member

    Tri Shield? Doesn't ring a bell...

    :laugh:
     
  3. rack-attack

    rack-attack Well-Known Member

    Jim who???:Do No:
     
  4. ss4825

    ss4825 Well-Known Member

    Better watch that Jim guy. I bought a tranny from him and no matter how hard I tried I just couldn't break it. Same with the converter.
     
  5. sriley531

    sriley531 Excommunicado

    Yep, never heard of him! Bet he doesn't know anything about buicks anyways. Is he a member here?...:D
     
    Mark Demko likes this.
  6. Mister T

    Mister T Just truckin' around

    I heard he's now building "FE" and "385" series engines, with the occasional "Y" block tossed in for spits and giggles. :laugh::laugh:
     
  7. mrolds69

    mrolds69 "The Cure"

    You can't trust him Brandon! I bought a set of what were supposed to be "used" hood hinges from Jim and they looked like they were NOS when I got them. You can imagine my disappointment.
     
  8. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Delays are inevitable in engine building, and restoration. That is expected. No one knows that better than me:laugh: I've never had any trouble getting a hold of Jim. Sometimes, I have to leave a voice mail message, but he gets right back to me promptly. Jim is a perfectionist, and he surrounds himself with like minded people. I've never been disappointed by the quality of work coming out of Tri-Shield. Top notch all the way. Thanks Jim.:TU:
     
  9. Dana/Beth Andrews

    Dana/Beth Andrews Huc accedit zambonis!

    yup, Jim's the guy alright...just don't let him near the hot tub!:eek2:

    D & B
    :TU::TU:
     
  10. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    What happened in the hot tub, pray tell:grin: Has Jim gotten back into the good cupcake graces?
     
  11. Dana/Beth Andrews

    Dana/Beth Andrews Huc accedit zambonis!

    Larry that was a long time ago and what happens in the tub...well you know. The term "release the kraken" does
    Come to mind though. D & B
     
  12. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Jim has more than 2 arms?:laugh: That would be a distinct advantage in Auto Mechanics.
     
  13. 69GS400s

    69GS400s ...my own amusement ride!

    I dunno .. had him build me a motor back in 2005 and I've tried everything possible to break it - drag racing, long highway trips, tearing up the neighborhood - yet I still cant get it to break nine years later

    ... and the worst part it - every time I go to the track it gets faster and faster. How am supposed to bracket race and dial in a time if it keeps going faster ?

    :rant:
     
    mtooth2 and Donuts & Peelouts like this.
  14. papa roger

    papa roger Well-Known Member

    Jim at Tri Shield is the best decision I ever made when putting my build together. An extremely knowledgeable, honest business man who goes out of his way to see you get what you need and continues to help you even after the engine or restoration has left his shop. Always there for help. I don't honestly know how he does it. Bless you Jim.

    On The Eighth Day God Created Buick ( Maybe I should change that to On The Eighth Day Buick Created Jim at Tri Shield )
     
  15. Dana/Beth Andrews

    Dana/Beth Andrews Huc accedit zambonis!

    Have me drive it. ROFLMAO. Sorry I couldn't pass that up.

    Beth :bla:
     
  16. David Butts

    David Butts Gold Level Contributor

    I've heard Jim is a very "Wise" man.
     
  17. SmittyDawg

    SmittyDawg Need another garage....

    :laugh::laugh::laugh:
     
  18. CarolinaDrifter

    CarolinaDrifter Well-Known Member

    I guess I'm goin thru a Gorge Washington phase but I cannot tell a lie . Every time I've ask this Jim guy a ??? I've always got the best info and he's been real helpful thru my learning phase with my dummy ???'s
     
  19. sbrmd

    sbrmd Well-Known Member

    On The Eighth Day God Created Buick ( Maybe I should change that to On The Eighth Day Buick Created Jim at Tri Shield )[/QUOTE]

    I think Jim may have been created on day nine.
     
    mtooth2 likes this.
  20. HotRodRivi

    HotRodRivi Tomahawks sighted overseas

    How far is TSP from CA.
     

Share This Page