Say Mr. Mike ........... Mr. Mike, Distributer gear oiler, can u let me know the tube size that you use or the fitting type and size. Also do you do anything at the end of the tube to effect spray patern or is it left as is, just a strait squirt from the hole aimed at the gear? I'm going by the pic in your catalog, but since your catalog is not printed in State of the Art High Definition on glossy paper, it's hard to tell. Regards, Anson Favalessa
It's just standard copper gauge line and fittings, I plumb mine on the outside , cut it with a tubing cutter which close the hole up some
I hbave a couple of those from Poston,NOS,I will sell them if anyone needs them.I also have a couple used ones.Bruno.
Thanks Huggs, I' mean Huggies, no Hugger, heres another on , does it matter , or is one more reliable, that is, the type of farel. Ones tapered on both sides, ones tapered and flat with slots for pinch. Also are u using the fitting with 1/4 fine pipe, or slightly bigger coarse pipe threaded deal? Bruno D, I'm trying to scrounge one up out of my pile of fittings, this magic pile has never let me down yet.
