Girdled 464 shortblock

Stock crank, aluminum rods.
13-1 compression
Custom grind flat tappet cam
Scavenger oil system with stock pump

Built by finish line
Ran for 3 years in my chassis car with stage 2 SE heads. Best et was 8.96. 105 passes

It’s been sitting for 3 years since I put an aluminum motor in the car.

Located on Long Island NY
Can bring to gs nationals

$3,750

 

What's on it for a pan, what rods are in it

 

What rpm was it shifted and what was trap
rpm ?

 

not sure where the pan came from. It was something Bob had and we used. I can try and look through some paperwork to find out what rods are in it

 

Shifted at 6500. About the same through the traps

 

Yes I have the cam card

 

Let me know on the brand of rods and grab a picture of the pan if possible

 

Also has it been block filled

 

I bet the rods are from R&R.

 

Hey I've seen you! I'm from long island as well