Hooker Super Comps for 350

Hooker Super Competition Headers model 1103, 1-3/4" tubes, 3" collector, new, black paint. No dents, no rust, no tax. Never been bolted up. $400 plus shipping. Or pickup in MI. Save $$ over jegs or summit.

 

Very nice! And very reasonably priced good luck folks he’s giving somebody a present

 

Fritzee, maybe there just aren't any guys that want to build a hot 350.

 

We'll see if you still have them when I visit in Aug. Maybe I'll sell my TA's although I'd really like to test both.

 

Are your TA's 1-5/8"?
A hot 350 needs to breath baby!
Just a 212 cam & a 4 bbl intake doesn't = a screamer..... you need all the good stuff.

 

Too bad those don't fit a 78-87 Regal.

 

I’m pretty sure it’s the hooker headers that fit the G body. I had a set way way back on a 350 in a 85 regal and I remember trying new TA headers but they didn’t fit. Then I went with a used set of headers that fit fine, I’m not 100% on the brand but there were only hooker, Poston, Doug’s and TA selling headers in that era. We also know to hookers fit the 64-67 Skylarks the TA that 100% will not.

https://www.v8buick.com/index.php?threads/buick-350-headers-etc.283351/#post-2336445

 

you will have those for a while, 350 Hot? the radiator is probably dirty or the thermostat is stuck take a look at that. what is your timing set at what do you plan to do with the car, I would shave the heads and take 30 off the top.
212 cam, 2bbl carb?

 

Mike, description says fits :68-74 Skylark, Century, Regal. Not sure on later years & what frame/ eng bay changes 78's have over 74's?

 

let me know shipping to zip 13849
no rush . thanks .

 

Will check later today.

 

I’ll be dipped. I was under the impression that none of the 350 headers fit the G-body platform.

I’ll get in line for a minute while I do a little more research.

 

Del, looks like both Fed Ex & USPS Priority 3 day are the same @ $55.90

 

If I was sure they would fit on my 62 skylark I would pick them up.

 

I had a set of cheap used ones I grabbed from someone on here for trial fit in my 65 .
no go driver side . took pics . when I get home I want to check pics and compare to be sure but I THINK the 1103's are the ones that fit 64-65 chassis .

 

Take your time...not a problem....
If you need pics from a certain angle, left or right, let me know.

 

good morning .
just to be fair i will pass . probably should not . but not needed right now . if i gotta buy new later i will .
could not find old pics but i'm pretty sure the 1103's are the ones for 65/350 .
maybe someone close by can grab 'em - easy .

 

I'll give it a shot. I own a hammer and a torch.
PM inbound.

 

Hammer & a torch? Sounds kinda like what Demko did to a very nice original oil pan I sold him.

 

Sounds like he knows how to get things done.