Manual Brake Master Cylinder

Discussion in 'Parts wanted' started by Dano, Jan 20, 2022.

  1. Dano

    Dano Platinum Level Contributor

    Looking for a nice "CT" coded master cyl. core w/o bleeders (CT coded m/c's came w/ bleeders for power brake cars & w/o for manual brakes). I think '68-72 all used them. Not worried about date code but spring of '70 would be ideal if I had my choice. I had/have one I'd put away for my car & thought it was just dirty but it's pitted & can't even read the code. CT Master Cyl.jpg
     
    Stage 2 iron likes this.
  2. BrianTrick

    BrianTrick Brian Trick

    Does it have the oval lid or rectangle?
     
  3. Dano

    Dano Platinum Level Contributor

    Oval. I almost just texted you to see if you had one before posting this.
     
  4. Brett Slater

    Brett Slater Super Moderator Staff Member

    More pictures of what Dano is looking for.

    20220112_163837.jpg 20220112_163737.jpg 20220112_163621.jpg
     
    Stage 2 iron likes this.
  5. BrianTrick

    BrianTrick Brian Trick

    I shipped one to another member before the holidays. I might have one more.
     
    Dano likes this.
  6. Brett Slater

    Brett Slater Super Moderator Staff Member

    The picture in Dano's first post is mine before it was redone.

    I had to load up on brake cleaner and scrape the hell out of it in order to reveal the CT on that front tab.

    It wasn't easy but it's there.
     
  7. BrianTrick

    BrianTrick Brian Trick

    This is on a November/69 built 70 Flint car. No bleeders,but came with the girly booster behind it. The lid is slightly different,but could have been changed.
     

    Attached Files:

  8. BrianTrick

    BrianTrick Brian Trick

    This one was on another November/69 built 70,but is a Kansas plant. Manual brakes. These cars were pretty much twins,both built 11C,but built at different plants.
     

    Attached Files:

  9. newmexguy

    newmexguy Well-Known Member

    Doubt any of these have that "310" number but can check. A bunch of miscellaneous cores. Have no idea what the "mopar" ish one, is with the bolt on lid.
     

    Attached Files:

    Last edited: Jan 29, 2022
  10. taf44667

    taf44667 69 Vert 4-Speed

    Dano, might have what you need already restored. Let me dig it out and get pictures.
     
  11. Dano

    Dano Platinum Level Contributor

    Thanks! I was able to find an NOS one @ a Chevy dealer in NE (thanks to a tip from a board member) and as I suspected it wouldn't, it has no code stamped in it (yet:)) as I've seen this same part # w/different codes for different divisions.

    That said, I now have an NOS & NORS rebuild kits so I may still be interested in a core & being a parts hoarder, PM me with the details if you have a restored one Terry. Thanks guys!
     

    Attached Files:

  12. taf44667

    taf44667 69 Vert 4-Speed

    Dano,
    Here is the one I have. This was restored/re-sleeved by White Post, lifetime guarantee on function. Painted in correct gray, CT stamped, casting date 303, D74, cast number 5452310. Just unwrapped since completed years ago.

    I forget what white post charged me to sleeve and restore but I think it was at least $100 plus shipping etc. I would do $140.00 shipped if interested. Basically get my money back not including master. LMK 875E842D-880D-46E9-92DE-8582F9C10097.jpeg EFAFCD27-8D67-4E98-8585-317720A6E1B3.jpeg 73EBC7A3-1ADF-4483-A77E-FEDE750D0BD6.jpeg 477D454E-5444-453D-B8D5-04D249647EBE.jpeg A0F83FB7-0413-4615-B4EF-57B558ADC454.jpeg CB5F02B1-86BF-42E0-9BB2-4AE05EB0D80B.jpeg D1884929-989B-4CC1-BBDC-9A0DD2DF1B73.jpeg
     
    Brett Slater likes this.

Share This Page