Molotow chrome marker results

I learned about this product here and thought I'd share my results. I "painted" my turn signal and tilt lever plastic and it looks really good to me.
Before is the lower pic, after is the pair

 

Did you do something to prep it? Like a wire brush or something? Looks good!

 

I used a tooth brush size stainless steel wire brush, a pick and 1500 wet or dry. I just tried to get the loosest flakes of old chrome and copper off then washed in hot dawn water.

BTW, the marker is a 2mm tip bought at Hobby Lobby for $12. Turned out 2mm is perfect to cut the smooth area by the black end without masking.

 

Ice - I was going to try it on a '71 col. shift handle - Looks like it should work nicely.