Parting a 72 Skylark

Discussion in 'Car Part-Outs' started by StratoBlue72, Mar 13, 2012.

  1. StratoBlue72

    StratoBlue72 Well-Known Member

    This is a 2 door hardtop parts car. Kind of a junkyard car, mostly there, but a little rough. 350 2bbl., 350 auto., a/c. The interior is pretty ratty, in fact I hate to even open the door and crawl around inside, as I'm sure it's had it's share of mice. I'm paranoid about hantavirus, so I would have to pretty much fumigate it before I disassemble it.
    Feel free to ask about anything you may need. I've got tons of other parts besides these parts cars that needs to go.
     
  2. V8Sky

    V8Sky "Scarlett"

    Tim,

    Do you have a real nice 1972 set of the deluxe white door and rear panels with the woodgrain?
     
  3. copperheadgs1

    copperheadgs1 copperheadgs1

    Tim, I amminterested in radiator if an IA tank on drovers side.
     
  4. StratoBlue72

    StratoBlue72 Well-Known Member

    Chris,
    I may have some out of my 72 Stage 1 coupe, as I would go back with the standard trim panels if I finish the car. Do you need conv. rears ? I know I don't have those.
    Tim

    ---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------

    Dave,
    I will take a look when I go out to the car the next time. It's about 10 miles out of town, so I don't go out there real often.
    Also I will see if I can still find the rad. out of the 71 GS for you. It's been so many years ago, I will have to do some digging and see if it's still around.
    But I guess first I will see if the buildsheet is still here, and look at that code first.
    Tim

    ---------- Post added at 08:52 PM ---------- Previous post was at 08:52 PM ----------

    Dave,
    I will take a look when I go out to the car the next time. It's about 10 miles out of town, so I don't go out there real often.
    Also I will see if I can still find the rad. out of the 71 GS for you. It's been so many years ago, I will have to do some digging and see if it's still around.
    But I guess first I will see if the buildsheet is still here, and look at that code first.
    Tim
     
  5. V8Sky

    V8Sky "Scarlett"

    >>I would like to buy both the door and rear panels if you have a nice set in white.
     
  6. StratoBlue72

    StratoBlue72 Well-Known Member

    Chris,
    I'm in the process of getting some stuff rearranged, so I will work on getting to those trim panels and see what condition they are in.
     
  7. V8Sky

    V8Sky "Scarlett"

    >>Thanks for looking for me Tim.
     
  8. f16dcc431

    f16dcc431 Well-Known Member

    Tim Im looking for wiper arms and door handles
     
  9. StratoBlue72

    StratoBlue72 Well-Known Member

    Depending on how nice of condition I should have those.
     
  10. apa lifter

    apa lifter Not My Pants

    How are the front fenders Tim?
     
  11. canuck buick

    canuck buick Silver Level contributor

    Looking for a pair of tailight rubber surrounds.
     
  12. 2791 lark custo

    2791 lark custo Gold Level Contributor

    I might be interested in the rocker molding on one side if you have those. I will check what side I need and let you know. I have some deep scratches in one of mine
     
  13. 71SkylarkConv

    71SkylarkConv Roll Tide

    Looking for 1" rear sway bar.

    Thanks
    Art
     
  14. StratoBlue72

    StratoBlue72 Well-Known Member

    I believe the originals are 7/8", but I don't have any extra ones at the moment.
     
  15. 71SkylarkConv

    71SkylarkConv Roll Tide

    Probably right. I'd take either.
    Art
    RTR

     
  16. 71Stage2

    71Stage2 71stage2

    Hi Tim: Im' looking for the glove box light assembly.

    Thanks,
    Ken
     

Share This Page