TA's "Buick Wonderland" Winter Sale!

TA Performance is running our "Buick Wonderland" sale this winter starting December 9th and running until December 18th. Do you have a project you’re working on or are looking to upgrade and add some more power to your Buick but have been holding off on doing so? Well now is the time! Get your Buick Performance and Replacement parts before the Holidays or as a great gift for a friend or loved one!​

• $25 off of No-Hop Traction Bars
• $25 off of Holley SP1, SP2 and SPX TA Intake Manifolds
• $20 off all TA V6 Valve Covers
• $15 off all Rear End Covers
• $15 off of TA 2026 Stock Replacement 400-430-455 Balancer
• $10 off all Camshafts
• $10 off of Oil Pump Upgrade Kit (TA 1508/1508, 1502, 1510 & 1704)
• 10% off all Bolts & Fastener Kits
• 10% off all Gaskets
• 10% off all Performance & Adjustable Pushrods
• 10% off of Motor Mounts and Frame Pads
• 10% off all Timing Sets
• 350-400-430-455 Non AC Alternator Bracket (TA 8020) Introductory price of $65.00
• $5 off Cast Aluminum Reproduction '61-'87 196-215-225-231-252-300-340-350-400-430-455 Thermostat Housing (TA 1535)

Remember! To get the discounts you need to mention during your purchase that you saw the ad.

Products are subject to availability, discount on sale is limited to quantity on hand, no rain checks. These discounts do not apply to past or future purchases, only purchases made during December 9th through December 18th.

​

 

10% off of Motor Mounts and Frame Pads

>>Dang - I just ordered my 455 frame pads today from TA and didn't see this post until now!

 

Would the "$10 off a camshaft" apply to a custom ground cam?

 

Sorry Andy, no it only applies to cams in stock.

 

Thanks for the info.

 

Thanks Mike - I am about to order your frame pads/mount kit for a 455 into a 67 Buick Special. What are the pro's and con's between the aluminum and cast iron frame pads?

- Bill

 

Ask when you order but I believe aluminum are more for race applications

 

The aluminum pads are more susceptible to corrosion if used in a DD type car. They do weigh about half of cast iron if that's a consideration, but should be as strong. This is basically what the catalog states.

 

looks like i'll be holding off on the rear disc kit so i can purchase some ta no hop bars and a fuelblock off plate!!..i'll just wait til friday incase i find/dont find a cool deal im in need of for the killer deal days.. :beers2:

 

How much of an improvement are the no-hop traction bars over stock (69 Skylark) ? I am building a 550+HP engine.

Regards,

455nGLIDE

 

They improve it quite a bit, they're basically a cheaper alternative to getting a whole new rear end suspension setup. They essentially reverse what the suspension is doing. The stock suspension is trying to lift the rear end when under load, by putting the no hop bars on it makes the chassis try to push the rear end down. By putting more of a downward force on the rear end, this results with better traction.

 

well orderd the ta no hops and block off plate i pretty much got a dollar off give or take and free shipping due to the 25 off the ta no hop bars!

thanks again TA

 

I packed the fuel block off plate in the same box with the no hop bars and I wrapped the bars and little bushing thingies in newspaper to prevent them from chipping each other, so be sure to unwrap everything before you toss the paper :beers2:

 

thanks for the heads up

 

Any sales going on for this "winter" of 2020. If so can they be applied towards incoming build projects for you guys?

 

Looks like this is the time to order my head stud kit for the stage 2.

 

The original post is from 2009, Dalton69Skylark replied after almost 11 years with the question if there are any sales going on for 2020.

 

2020 Covid Specials....

 

About the 67 aluminum chassis mounts.Yes I got them about 30 years ago,my car has way over 700 HP,and they still look new.By the way,the car is kept outside.Bruno.

 

Welp in that case I wont be making an order..... oops! hahaha