I am having issues with finding a throttle cable to work with my set up. I have a 72 GS that was a 350, now converted to a 455. When i was running the HP series Holley, the cable seemed fine, now have a different set up using a 1050 Dominator. Now the cable isn't long enough. What are you guys using?
https://www.jegs.com/i/JEGS+Perform...IpPqCiM_N-AIVRdWzCh1ykAnaEAQYASABEgIFpfD_BwE# The above used with a stock or Lokar cable gives you a lot of adjustability.
Yea go with lokar and dominator throttle bracket,....I have a complete setup off my brother's car if your interested
I'm gonna see if i can trim the sleeve for the stock cable, it seems that my pedal travel is hitting that and not allowing the cable to be all it can be. I also drilled a hole through a bolt and sliced it to substitute the plastic piece that goes into the pedal. I can get a little more adjustment that way, and it wont break like the plastic piece. If that don't work, i'll get the JEGS piece Thanks
Mike, shop around. Lots of choices for that bracket. I found this one on Amazon. https://www.amazon.com/Throttle-Cable-Bracket-Dominator-Carburetor/dp/B00VS6GBK8 If you look carefully, it comes with an attachment for the stock cable (square opening), as well as aftermarket (Lokar) cables.
How about using stock longer throttle cable may be from a full size Buick, I know I have a few around.
