Used setup, haven't run them but cane from a fella board member suitable for a track car under 3700lb $275 plus ship, complete with spindles ready to bolt on, uses drum spindles with an aluminum hub assembly
Lemme do some research, will post pics tomorrow https://www.summitracing.com/parts/...MI6vPbvJDI3AIVirXACh2aZwOJEAQYAiABEgIv0fD_BwE
Summit says under 2800 for 4 wheel disc and under 2400 for rear drums. You have under 3700.......are you sure the summit part number is the correct part
I say 3700 because , it cam off a Gary Laughlin's car that ran 9's , I came to conclusion years ago that Wilwood,Aerospace etc don't have "race" brakes for a full size car, they obviously will work but they rate them very conservatively for "cya" reasons that's my belief anyway
Only reason I'm willing to sale is because I plan on doing alot of street duty with my Tomahawk car and they won't be ideal in that environment, for strip duty they wouldn't concern me
Yea, all the way to Cali, gonna be around $60 or more I'm sure, may have time to run them by there tomorrow
OK i guess that make's sense. I've been wondering why I can't find any in my weight area I will get in line too I'm sure they won't get to me. I don't need a quote just tell me how much to send you if it gets this far down. my 4 wheel manual drum set is going to have to finally be retaired, the new combo should aim low 10s high 9s
I have the same setup on Buizila Ben and she weighs 36 hundo with me in. I just upgraded to their BP20 pads part # 150-9413K. Those are a more aggressive pad good for over 130+ mph and 38 hundo.