Here are the actual yellow rubber side walls bonded to the tire. Just the front mounted. I'm very happy the way they turned out
Ok guys I need a bit of help. Wiring the tail lights up. Running lights/brake are the inner and outer, then the center is blinker?
Close...looks like inboard and outboard are Tail Lamp, Stop Lamp and Directional Signal. Center bulb on each side = Tail Lamp only. https://www.teambuick.com/reference/years/68/images/68-113.png Devon
Engine bay wiring competed. Had to rip out all the previous wiring for factory ecu since I switched over to the Holley Terminator X system. It's absolutely wonderful for those that are on the fence.
Is there a weatherstrip seal on the aft door jam vertical pinch weld? If so where would I be able to buy one? Thanks
Can you take a photo of the area in question? What you're referring to might be called "door jamb windlace". I don't know if there's any reproduced specifically for our big cars, but we might find a substitute if we're thinking of the same thing. The generic stuff looks like this, just enough to cover the sharp edge of the weld, and it comes in different colors with a bit of texture/grain: https://www.oerparts.com/product/wl310000.html Devon P.S. enjoy seeing your progress.