Parting out a 1965, 66 and 69 Skylarks

Looking for the right rear (passenger side) wheel opening moulding, the moulding at the bottom of the right quarter panel (behind the tire), and both mouldings on the bottom of the front fenders (in front of the tires).

Tom

---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------

This is for the '66 Skylark. Thanks.

 

Hey Tony the rear wheel opening moldings are short. The drive side is nice and the passenger side has a small dent on the front bottom.

 

What do you want for all of the letters?

Thank you,
John

 

Looking for the console trim that goes around the shifter on automatic console. Any luck?
jim

 

what shape is the rear bumper in on the 69 skylark? couldnt really tell by the above picture. thanks, Bart

 

Hi John, I would take $40.00 plus shipping. Thanks, Kimberly

---------- Post added at 08:20 AM ---------- Previous post was at 08:17 AM ----------

Hi Jim, The car doesn't have automatic console. Thanks, Kimberly

 

Hi Bart I will post some pics of the rear bumper later on today. Thanks, Kimberly

 

Do you still have the console tach?

 

No, my car did not have a console.

 

Oh well
thanks.

 

Tom I don't have the passenger side wheel opening molding but I do have the right quarter panel molding and the two moldings that go on the bottom of the front fenders in front of the tires. There is a gouge on the right side molding that goes in front of the fender. It looks like the bumper hit it and there are some scuffs on the bottom. The left one does have a ding and a scratch. The quarter panel molding has a screw hole in the black stripe but it very straight.


Thanks for your interest, Kimberly

 

Your welcome!!

 

Hi:

Do you have the '65 Skylark front turn signal housings? Condition?

Does it have power brakes? If so, I need the brackets that hold the vaccuum pipes.

Does it have reverse lamp deletes? Condition?

Do you have the tail light housing stud covers (weird shaped nuts that went over the tail light housing studs)?

Thanks.

Dan

 

INterested if the passenger side rear quater panel is in decent shape? I can use the lower portion. either shipped 60174 or i could possibly drive that way. what style and gearing rear end is in it? what type of trans was in it? if it is a st300 i could use some bracketry for the kickdown switch.

 

Dan, The turn signal housings- one has good studs, good wiring and plug but socket is bad and the other one is missing studs and wiring has been cut. It did have power brakes but the bracket is missing. It had reverse lamps which we have already sold and I sold the stud covers with the taillights. If you want a pic of the housings just let me know. Thanks for your interest, Kimberly

---------- Post added at 08:13 PM ---------- Previous post was at 07:52 PM ----------

Hi Matthew, No good on the quarter panel. It has a single track 8.2 but don't know what gears. It has the 2 speed auto and the 300 2 barrel. There is a switch on the driver side rear of the intake manifold with a bracket attached to it. Is this what you are referring to???? Thanks, Kimberly

 

Kimberly,

From the '69, I'd like the radiator hold down, and shipping to 93065.

Thanks,
Steve