1958 buick tranny linkage

Discussion in 'The "Juice Box"' started by frame30, Nov 6, 2018.

  1. frame30

    frame30 Active Member

    I have reinstalled the linkage that goes from the gear selector to the transmission in my 58 Buick wagon. I did not alter any of the linkage lengths. However, when I move the gear selector itself, it will not go to the far left/park side. Any thoughts on whether this is just hanging up somewhere or if I need to redo it somehow? Cheers.
     
  2. jhems17

    jhems17 Member

    I once had to realign my shifter as well. I swapped engines and somehow must've messed with the adjustment on the linkage. I had to sit in the car and move through the shift points while my dad loosened and adjusted the linkage. I would tell him when everything lined up and he would tighten it there. Hope this helps.
     

Share This Page