I have a left and right 1964 Special fenders. No rott and no patches. I did strip all of the paint off . They do have a couple of small dings but not crushed or creased. I even had sand blasted all of the inner edges to get to old paint off. The outher portion chemically stripped. I have about 3 hours in stripping the outside and removing the paint from the inside and edges. This will save some labor for the future owners of them. They will work for a Skylark as well but they have in additional to the side molding holes they do have 6 bolt holes that would need to be welded up for the port holes. I'm going to try and get my 1964 Skylark project out of the garage tomorrow and I should be able to get pictures then. $250 each + shipping from 60586 Thanks.