Core came off a clean Skylark. Looks like it was taken off, blasted and just powder coated without taking care of any minor issues. So even though the panel under the battery tray is in great shape, there was a very small area of rot in the corner that was not repaired. Installed, it would be barely noticeable. There was also some pitting and some damage from where a welded nut broke off. Why they didn't fix these things before coating it is beyond me. With that being said, its in really nice shape and can be used as is. I would say this would be a perfect core support for anything short of a show car The inner fenders are in good shape and have also been powder coated. Again, even though they came off a nice clean car, there was still some minor rot on the left side where it meets the core. You can see it in the pics . Also on the right one, the corresponding hole for the welded nut on the core is also damaged. A few whacks with a hammer and dolly will take care if it. Once installed, the damaged hole will be concealed under the battery tray. I'd like to get $800 for the core and the inner fenders as a set. Parts are located on Long Island NY
You really, really need to keep Jen happy. I suspect that she would have no trouble finding help on here to ‘dispose of’ a few things cluttering up the place. “No officers, the basement’s empty except for a few Ford parts-you’re welcome to look! Would you fellows like some tomatoes from the garden?” Patrick
Im trying. She didn't complain but she did "mention" something about the clutter. She had to move a fender to use the washer, so its time to thin out the parts collection a little Admittedly, its getting a little out of control down there.
