Sent invoice from Paypal and noticed that I will have to include the oil filer neck unique to the smog cars, it will be in the package too. Thanks,Joe
Interested in driver fender, is it still available? I am also interested in the hood and windshield. Let me know. Thanks, Charles
Charles, Yes, I do have them on my Ebay store for a little more, lots of photo you can enlarge for a close up view, here is the link http://www.ebay.com/itm/100-Point-C...-Left-Fender-Rust-Free-Can-Ship-/282377588893 . The windshield I have is on a 4 door which is a little taller then a 2 door.
Interested in the disk brake assemblies complete to bolt on 67 Skylark except rotors. Also need the power booster, proportioning valve, even brake fluid lines from master cylinder/valve to disks. I would replace the rotors, pads, and master cylinder. Shipped to 76109 You can send me a PM or respond here. Thanks
Interested in the hood lip trim / nose piece and head light bezels. Any close up pics? Any pitting? How is the chrome? Does car have rear wheel well trim? If so what condition are they in? Any extra holes in them?
The lines might be a challenge to box up so I will quote the other parts along with the booster would be $60.00. No extra charge on the booster since it looks old. I can send you invoice thru Paypal for the parts with that shipping, then after its apart in a few days, can get the shipping quotes on the lines. Joe
I don't think its a bolt on and drive kind of carb. Its been sitting with old gas, the car drove off the trailer and moved it around, found many vacuum leaks around the motor so I can't say it was good. Core only for $40.00 plus shipping.
Thanks for the business, I will have all the Smog parts off in a few days and shipped. Get back to you then with that info. Joe
Sorry, Its not good enough for your car, just driver style stuff. The rear wheel trim had mud flaps which made 2 extra holes towards the back. Headlight bezels did have some pits and the trim for the hood also had a few tiny pits along the top edge, with one of the mounting studs broke.
OK, we have a deal, I did forget to include the spindles in the list I mentioned in my earlier message but assumed they were part of the disk brake set up. Let me know if that makes a difference because without the spindles I can't use the rest of the hardware. I will be buying new parts and understand that but the basics are what I need to set up my car for disks. I will send you a PM so you know how to send me a PayPal invoice. Thanks
Its up for grabs, all the mounting tabs are intact and include the studs with nuts. I will get some photos of it tomorrow and post them here.