1. The first one came out of a wrecked 70 Electra with about 58,000 on it. Was rear ended in the early 90s then parked. I bought the car around 2000. Yanked and put on a stand for a few more years. Took heads off and had valve job, and all new springs and retainers put on at R and R Speed shop here in Huntsville. Why it was apart I put new; cam (Isky) lifters and pushrods, timing chain and gaskets. Checked the lower end and everything looked great....so I just re-torked everything down according to Buick manual. Block casting 1231738 M-18 Heads 1231786 both A-19 Intake on it is 1386003 F-10...which is 69 400-430 I have the 1231718 L-13 intake....could not find it when reassembled. Distributor 1111984 9L 4 $750.00 2. I saved this one from going to crusher with car. Cant turn over with breaker bar. Block 1231738 J-6 Heads 1231786 J-3 and J-6 Intake 1231718 H-25 Distributor 1111984 9A18 Needs complete rebuild. $175.00 Needs picked up preferably....but will ship. Located in Huntsville Ala
Steve, tried to PM. Your mail box is full. ---------- Post added at 06:34 PM ---------- Previous post was at 06:32 PM ---------- You PM Box is full. Tried to PM
interested in the complete rebuild one let me know if it still available do you know what car it came out of
