I am building a t-bucket using a Buick215 out of a 62 skylark. I also got the tranny, driveshaft and rearend out of the car. everythign $200. big problem now! I need 15 inch rims (5 or 6 inches wide) that have the 4 on 4 1/2 bolt pattern. Does any one know if this Rim would even exist? not enough meat on the axles to re drill. any input would be greatly appreciated. Thanks, jason reynolds reynoldz21@yahoo.com
15" 4 on 4.5 wheels wanted Jason, The 61-63 Buick Special station wagons came with a 15" wheel. But it's quite narrow. Think it was about 4 1/2" wide. You might also check Fomocos. Early Mustangs, Falcons, Comets, Mavericks with 6 cyl. motors had 4 lug wheels on 4 1/2" centers think some were 15". But check all wheels by trying on front hub before you buy. The Special has a large diameter hub, so all will not go on, the very center hole of wheel being too small. Bill V.
steel wheels JASON, l have 15 inch wheels on a 63 skylark out in the yard, i dont know how wide they are but if you can use them let me know. dave.
