455 Engine that is ready to go Bringing to Cecil Coumty

My nephew is selling his 455 in his 65 Skylark it has run the best of 10:97 @ 122 and change the car weighs a little over 3800lbs with driver. The engine is a .030 75 455. HE is selling carb to pan needs nothing. 4000.00
Engine: 1975 455
.030 Pro True dished Pistons
Ported 70 Stage 1 heads & Cometic gaskets
T&D Roller rockers 1.55
T/A 308s cam with cool faced lifters
Complete oil mods done to block and timing cover
Carb is a Holley Dominator done by Pro Systems
T/A Intake ( this is the only part that needs attention)
If there are any questions I will do my best to answer them he has a Mustang Dyno and I think it made 398 RWHP. We will be bringing it to Cecil County with us Friday Sept 21 and Saturday Sept 22 Thanks for lookiing. I will post pictures tomorrow night.

 

Good deal.

 

Whats the compression ratio?

 

Sounds like a great buy. wish i had the cash on hand.

 

Interested. How many miles/passes on it? Who built it? What's on it for a distributor/valve covers? Who did the heads?

 

It has about 100 miles and 30 passes. My nephew did the build a friend machined it. Stock valve covers and HEI ignition. The heads were done by a local guy that works for Cunningham Racing.

 

The engine will be out today and will be ready. I will post pictures tonight.

 

Do you still have for sale ?

Interested ?

 

Here is the picture of the engine

 

At this time i have to pass.Great deal.Great seller.

 

TTT. We will also be bringing other parts M/T headers 325.00, a Meziere HD water pump new 525.00 Sold, Chrys Indy Intake for Dominator 350.00 Complete 3" X pipe exhaust with T/A tail pipes for 64 to 67 with use of M/T headers 350.00 Sold, T/A aluminum engine mount plates & mounts 80.00

 

If the indy intake has been modified for the 455 ill take it

 

Herb it has not, my nephew bought it with the intention of doing that he has started the adapter plates but they need to be angle cut

 

I'll jump in line. Would like to speak over the phone, about the engine if possible. Thanks, John W (620)3440249----

 

Engie,
Interested in the headers. Mine are pretty toasted. What kind of shape are they in? Original or reproduction? Coated?
Dave

 

I will bring them tomorrow there is a guy that pm'd me about them, they are repos and have been repaired just painted black.

 

Ttt

 

Water Pump SOLD!

---------- Post added at 08:13 PM ---------- Previous post was at 08:04 PM ----------

Mickey Thompson header new price 275.00

 

Engine engine, mounts & plates, and headers are still available. They can be delivered to the GS Nats. We also have a 8.5 10 bolt 411:1 rear for sale it has 1/2" axle studs and new clutches. 650.00 OBO

 

Interested in the rear