455 Intake trade

Discussion in 'Parts wanted' started by Hawaii69, Dec 6, 2005.

  1. Hawaii69

    Hawaii69 Well-Known Member

    I would like to know if anyone knows what intake will alow me to use my ram-air aircleaner in my 69 GS with a 455 I have transplanted.
    I heard the B4B works, but would like to know for sure and if there's anyone out there that would like to trade what I need for my TA PERF. SP-1 also for a 455.
    I guess I need to keep in mind if the intake that works to make the Ram air cleaner will be right for the cam I have.
    Attach specs later.
    Call if you'd like at: (808)292-3187
    Thanks n Aloha,
    Scott :3gears: :beer
     
  2. flynbuick

    flynbuick Guest

    Negative on the B4B intake. Your two choices are a Performer and the stock cast iron.
     
  3. Eric

    Eric Founders Club Member

    Performer

    The Performer kinda fits. It sits a bit higher than the stock intake and you
    will probably get some rubbing on the bakalite plastic just behind the foam
    intakes on the air cleaner. I scraped mine and went back to the good old
    stock intake and the car runs just the same!

    GSX Eric :3gears:
     
  4. paul c

    paul c Well-Known Member

    i have a stock 70 intake i will sell. the only imperfection is the front alignment boos was broke off. i do have a picture. e-mail me. bigkahuna417@aol.com
     
  5. 67postGS

    67postGS Got Torque????

    Manifold

    My Poston s-Divider fits fine with the stock GS air cleaner and I also have a 455.
     

Share This Page