Went with a new combo for my 455 so have some good used parts for sale with low miles. All have approximately 15K miles, except heads which were freshened up about 5k miles ago. -72 455 heads converted to Stage 1, milled .030. (63cc). $500 -Sealed power 2362P forged .030 pistons, notched, incl. pins and rings. SOLD -HD TA rocker arm shafts with rockers and buttons. SOLD -Adjustable pushrods. SOLD Shipping not included in above prices, but it'll be exactly what UPS ground quotes to your zip from 43402. Or parts can be picked up. Travis Gillum Bowling Green, OH
Just to be sure, the rocker shafts are the TA thick ones? Are the individual rocker arms labeled "left" and "right"? Any pix of the end if the shafts and rockers? Thank you.
Are the heads complete, or do you need the shafts and rockers too? By freshened up, is there any porting, or polishing of the chamber done, or just stock?
To answer everyone's questions: -I will post photos of parts tonight. -Pistons are stock weight. I believe they were advertised as 10:1 in a 70 motor. -Heads do not come with shafts and rockers, I have those listed separately.
I missed a few questions... Heads did have a very minor polishing and gasket match done years ago, before the recent freshening up. Yes, rocker shafts are the "thick" ones offered by TA.
Waiting for pics of the pistons... AND 1st up for the pushrods...what size are they 3/8 or 5/16 chrome moly.....o No: thanks jerrold...
Here is a link to photos of the parts: http://www.dropbox.com/gallery/29674918/1/455Buick?h=c149f0 None of the parts in these photos have been cleaned up, so you can see how clean they are. I have PM'd the first people in line for each. I will move on to the next if anyone passes. The push rods are still up for grabs. Thanks, Travis
Fella"s... Im still waiting on a return PM from Travis concerning the questions I PM"d him about the pistons & pushrods...o No: Jerrold..