So far my 4spd swap in my 71 is going well, I just put my centerforce clutch in, BOP bell housing & fork & mounted my M20 muncie & z-bar bracket to the frame. I need the clutch pushrod from the pedal to z-bar & a flywheel cover for the 4spd. I heard Dave Kleiner has the pushrod, If he does, could anyone give me his #. Does anyone know if the BOP clutch fork is ok for this application, or do I need to buy that also from Dave. Thanks...
Here is his# (608)763-2076 as far as mismatching parts big blocks are different from the small blocks.