Interested in a good to mint condition handle and black knob. One that just needs to be rechromed would be fine. Also interested in everything needed to convert from an auto. to a 4 spd. ('72 Stage 1)I do have a nice bell housing, but will need everything else. I know there are some repro parts, and would be interested in hearing from anybody that has experience with those on what's good or equal to the original parts. My goal is to convert my '72 Stage 1 convertible and have it look factory.
i have a handle with a black shifter ball it might be a 5335 but i have to check..I just checked its a 7235
Have the handle at my work. Cant get it until Monday however Its the same as the one in my car now. Chrome is nice and has black ball without numbers. I can send a pic to your email. mrbuick65@rogers.com John
Tim, if the one doesn't work out with John, there was one on eBay a few months ago that didn't sell & I think I have the link saved. If it does work out and you don't need the plain unmarked black ball (I'm assuming your vert is bench seat), let me know & I'd be interested in it.
Hey StratoTim...if you are NOT in a hurry, stuffed away packed in storage unit, I KNOW, I have at least one, maybe two, complete 4 speed BUICK setups including trannys, zbars, shifters linkages and yes, even a consolette. I have a older, REPLATED 5335 shifter that I planned to use some 15 or so years ago, its still perfect, and well wrapped. These would be factory, original parts, NOT aftermarket, would prolly require cleaning & restoration. PM me for details IF serious! I also have this CRUISE CONTROL DASH PANEL with GREEN light and connector often missing for a Vert!!! http://www.v8buick.com/showthread.php?315855-CRUISE-CONTROL-dash-plate-70-72-VERT!!! Plus a factory AM/FM w/8 TRACK setup, original for a 72!! ya know, in case you are interested. :TU: Wheelz, Tampa Bay
I would be interested. A '72 date code transmission by chance ? If I'm going to cut a hole in my perfect floor, I want to make it all as correct as possible :Brow: I may consider adding cruise control, as that would be a cool option. Hadn't ever considered adding the 8 track, but you never know.
I have prolly 15-18 4 speed trannys. Listed here are just a few Muncies I have noted from my files. I MAY or MAY NOT have all these listed as some have been installed over the years and my hand written inventory was not well managed or updated...ou: For the most part, these were Buick trannys... perhaps a few Chevy, Olds, Poncho... P1B17 Feb 17, 1971 P1A29 January 29, 1971 P8B23 February 23, 1968 P0S25 November 25th, 1970 P0S12 Nov 12, 1969 P0M13 Sept 12, 1970 P2M19C August 19, 1972 (M22 Rock Crusher I believe from a 73' 455 SD Trans AM I once owned) Plus I have 6-7 BW, (mostly Poncho) 2-3 SUPER T10, and regular T10's. Wheelz, Tampa Bay
StratoTIM, sorry I have not gotten back to you on this. My wife is going thru some serious issues with breast Cancer and I just havent been very communicative lately. Lots goin on. No promises but I will try to get to your and a few other requests I have forgotten about over the next few weeks. Wheelz, Tampa Bay
Tim, Sorry, been meaning to get back to you (my PM box is full so can't send). I beleive there's at least one on eBay right now. I'll try and get you the link(s). I think I have a couple little pieces to your swap puzzle too. Dennis, So sorry to hear. Obviously I'm in no hurry for the parts I paid you for. Was going ask you about a few other pieces too, but no hurry on that either.
So sorry to hear about your wife. I understand completely, and there's no hurry whatsoever on getting to the parts.
StratoTim, Twixt Dr appts and Chemo and nausea and supporting my wife as she goes thru all this, I am going to try to get to my storage facility this weekend. IF you are still interested in parts for your 4 speed conversion, I will gather what I have... it will take me hours'n hours however, if you are serious, I will gladly dig out what I have and post pix. Lemono ASAP! ThanX Buddy! DANO, I need to ship your parts. Please PM me details. Wheelz, Tampa Bay
I've been meaning to get with you about a couple other things too, but I'm also not in a hurry & I know you're pretty busy with taking care of your wife.
Hey StratoTIm, I located SOME of the parts you are looking for. I have several Buick HURST shifters as shown. YOU get first right and I will decide if I want to sell the other shifters/levers or not.... 3 LEVELS of shifter quality: FIRST: (first 3 pix) is an original unrestored 5335 Buick lever with the complete original Hurst shifter #3138. Original Black ball, 1st/2nd and 3rd/4th linkages, however, reverse linkage hasnt been located yet. SECOND: (next 3 pix) nice, unrestored decent 5335 Lever, white ball is NOT included (its a 3 speed ball) Lever ONLY. THIRD: last 3 pix, REPLATED original 5335 lever ONLY, black ball, small pitting along the bottom is hidden under the boot. I know I have linkages, z bars, trannys and a whole lot more, I just ran oudta time today. Lemono what you think so far. Wheelz, Tampa Bay