I have a customer looking to convert his 65 GS to a four speed I Need pedals & bellhousing w cross shaft & with fork 65-66 GS also need Flywheel for 401 Please pm me with what you have
Nick, will the guy consider going aftermarket? Bellhousing is avail from Bendtsen, flywheel from TA or American Powertrain, then use a Hyd throwout. Ted has done this. There are a lot of unique parts used in the 65-66 GS setup. Tough to find them all, especially the frame bracket which is welded on:
I have a 66 Skylark Special with the 225 v6 and 3sp on column. I'm told the bellhousing, fork, z bar, linkage and pedals are all the same on A Bodies....So I have everything Todd
The 65-66 GS with Nailhead uses the same pedals but everything else is different. Nailhead has the starter on the drivers side so conventional V6-small block-400-455 linkage won't fit..... see the pic I posted above. Todd- your setup will fit V6-300-340-350- and likely even 400-430-455. Nick, I didn't hear back from you since my last PM about picking up the 401. I have some time off from work in Sept, let me know.
Well I have this stuff if anyone needs it....car being scrapped and my 66 GS is sold pending pickup. Other parts also available.