66 skylark quarter panels

How Many people would be interested in buying 66 skylark quarter panels???? full or patch panels !!

 

I have a set of NOS 66-67 full quarters,how can you get them done?

Thanks

 

HI George, I was wondering if those 66 quarters were for sale cause i need the left side

 

67 quaters

I would love to have a new set of quarters for my 67 GS340 i found a set of patch panels in canada but they were hand fromed the wheel lip was ok but the rest was really junk but it was the only alternative. It is all done know but i would be willing to buy a set for a future restoration. I am planning this when i get out of school so i am hoping the start repoping soon. Mine are ok but they were rotted behind the wheel so i made patches myself but 3 years ago i got into an aciddent and had to replace the driver side quater with another. from a parts car this is were the patch from canada came in. Anyways i would deffinetly be interested if some one was going to do it.

thanks Adam

 

I payed big bucks for this set,i`ve never ever seen a NOS quarter panel set of 2 for `66-`67 GS in all my years i`ve been into Buicks,and as soon i saw these i jumped on them,i payed alot for them but i have them for spares for my `67 because you never know what happens,i dont know if i would sell them.

Thanks

 

Put me down for 2 full sets.

 

2 full sets. Dan

 

Quarter panel ?

How many sets do we need to get before this becomes a possibility

thanks Adam

Also what about a set of outer wheel houses to go along with those Quarters

 

is this repro from Cross Canada any good???

 

Junk. They are made to fit over the existing 1/4 so the well is actuall smaller. then the molding hangs to low. Also there is no vertical bow in front of the well. Which is more profound on the hardtop BTW.
I butt welded 1/4 patches on mine.
Ray

 

Can hdtp 1/4s be used on convertible?

I finally got around to stripping the drivers side 1/4 on my latest 66 vert project, and found that the it had been patched long ago, and the pass had been replaced, poorly. Both were later rusted,and hit again, and bondoed up by some hack shop in Juarez, haha. Talk about the car that wouldn't die. I think the only thing that saved it was being a GS convertible. My question is: I have heard numerous people say that hardtop 1/4s require a lot of work to fit a convertible. I have a line on some very nice Skylark hardtop 1/4's in a local yard. If a good bodyman is doing the work, how hard is it really, to section them in, say from the top body line down, or from the crease. Thanks, Dan

 

Re: Can hdtp 1/4s be used on convertible?

i would be interested in a set for the 67. I had the high bid on georges set that sell for 2200 a few years ago.

 

Are the quarters still there.:bglasses:

 

I could use a full drivers side quarter and a pair for future. Scott

 

Im thinking the sameo No: How hard is it to fit a hardtop 1/4 to a convertible?
Dan.