67-69 big car rotors

Discussion in 'Parts for sale' started by breakinbuick11, Mar 13, 2024.

  1. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    Had these listed on eBay but didn’t sell:


    Up for sale is a used pair of front disc brake rotors for Buicks from 1967-1969 and some full size Oldsmobiles of the same vintage (1967 and 1968 only). These rotors have been discontinued for 40 years and rarely come up for sale. These are a 2 piece rotor that measure just under 12” (11.875”). They used a 4 piston caliper and were offered by Bendix.

    The pair will need to be cut before installation. I would also change out the inner/outer races on the one rotor (see photo). These will need to be cut by a shop prior to use. The pad surfaces have small pitting. Fortunately, they all measure over 1.015”. The minimum thickness for these rotors is .965”. There is plenty of room to work with. The rotors are 5x5 bolt pattern. The studs are all in great shape.

    Asking $500 shipped to the US. They will be shipped in 2 priority mail flat rate boxes that each include $100 in insurance, extra insurance will be charged to the buyer.

    see pics. Parts are located in Clarks Summit PA 18411. Possible delivery to Carlisle in April. possible delivery to BG but my buddy might be full already.

    IMG_4381.jpeg
    IMG_4381.jpeg IMG_4382.jpeg IMG_4383.jpeg IMG_4384.jpeg IMG_4385.jpeg IMG_4387.jpeg IMG_4388.jpeg IMG_4389.jpeg IMG_4390.jpeg
     
    chiefsb30 likes this.
  2. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    More:
    IMG_4391.jpeg IMG_4392.jpeg IMG_4394.jpeg IMG_4396.jpeg IMG_4399.jpeg
     
    Dano likes this.
  3. Dano

    Dano Platinum Level Contributor

    I could probably get 'em to BG (or Baltimore) if needed.
     
    breakinbuick11 likes this.
  4. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    Thanks Dano, these are now PENDING through eBay
     
    Dano likes this.

Share This Page