Hey George ,i know i must have one as i took one out and all the pieces are in a box.Do you want the piece that attaches to the pedal? Let me know exactly what piece you need.
Hey Bob,i just need the pushrod thats connected to the pedal and pushes the back of the master cylinder,but its gotta be off a manual brake car,let me know. Thank you:TU:
I found the one that i took out my manual car.It is complete with the clevis ,pin,rod & rubber boot. $15 plus shipping sound o k.
Yes thats fine Bob,let me know the total to 11102 and i`ll paypal or money order whatever you prefer. Thanks
Make sure you have the correct master cylinder to go with the correct manual input rod: http://www.buickperformance.com/ManualBrakeInputRodDifferences.htm
George,been away a couple of days,with the postal charge it comes to $23.00E-mail me your shipping adress,and i will return mine so you can send a money order.BTW, the rod i have is out of my 67 & is the short 4 in. one as shown in the link that George Nenadovich put on there.Check it out to make sure the one i have is correct & let me know.
Frank,i may have one in a Special that i'm going to part out ,but haven't had time to get at it.I'll check it out.
Frank i havn't looked at it yet. The weather has been too cold.I will let you know when i take it out .