Here is a picture of the screws that I need, but I don't have a picture of the press on tin thingy I need for the door panel emblems. I am looking for new on both parts, but used will also work if someone has them. Thanks, Scott
I have four-bazzillion-six-hunnert-eighty-thousand-fie-hunert-fiddy-three of those screws for ya. Good shape, used, not new. How many do you really want?? :TU: Wheelz, Tampa Bay
AMK products should have them..... they MAKE repo bolts. Also sold by other vendors. Can also try Inline Tube, they offer a lot of hardware as well. Not sure if AMK makes their stuff too.
LOL!!! Thanks Wheelz and everyone who replied, am going to see if I can find new before having Wheelz sell me a couple million of his!!! Thanks, Scott
I think you can get(or something close anyways) "the press on door thingy's" at your local Ace Hardware. That place never ceases to amaze me with their vast selection of hardware/fasteners.
Those are standard thread. If you need screw thread look on this page: http://www.amkproducts.com/bulk2.asp?code=7220&title=Tapping+Screws+-+Hexwasher+Head I've seen both screw thread and standard thread used on the same car. Screw thread was on the inner fenders and the std thread was on the crossmember-to-fender.
The one in your photo is a 5/16-18 bolt used throughout the car. The link I gave you is the same bolt as your photo with the anchor molded into the head. I used them last year to bolt my 1970 Skylark back together. They are used on inner fenders, core supports, etc, under the hood. I also used them on my 1966 Gran Sport, but as Walt stated, some cars (like my Flint built 1966 Gran Sport) use the coarse thread 5/16X18 and the 5/16X24 fine thread.
Just ordered everything from AMK, including the door panel push on thingy's!! Thanks everyone!!! Scott
Just now saw your post, I stock almost every fastener that AMK produces for our Buicks. Wish I would have seen your post sooner, could have saved you some money. Keep me in mind next time! 100's of Buick GS/GSX/Skylark Fasteners now available on my website. These are NEW fasteners, and Made in the USA. Also available . . . . Engine Cradles, Wiring Diagrams, Grade 8 Engine Bolt Kits, Factory AMK Exhaust Bolts, King of Torque – “You’re Gonna Need a Bigger Hemi” Banners, License Plates & Stickers, Buick Console Decals & More! 455 Engine Building Service – Frame Off Restorations – Distributor Rebuilding See our products here > D C Muscle Cars – Done Correct!.