As we start the slow and agonizing process of putting the 67 GS400 convertible back together I have found we need some things. I will ad to this list as I need more stuff So here goes..................... This is a NICE car so I need NICE pit free parts thanks 1. Trunk lid trim 2. Both hood scoop chromes (I have the inserts already) 3. left side 1/4 extension chrome trim 4. Tail Lamp bezals and lamp lenses 5. Headlamp bezals 6. Both rear full wheel opening moldings dent free please 7. steering wheel (will consider nice sport wheel upgrade too) 8. both upper windsheild convertible top corners (chrome near glass) 9. grill trim (Have a grill) more coming soon thanks
We are both looking for the same things looks like. I never found a good trunk trim for my other car and had to get one redone, was not cheap but looked good. Jim N.
I have many of the parts you need. Send me a current list with your email and I will send you pictures. I have been stripping '67s for a long time and have most parts re-chromed or polished (SS and Al). Jim
I think I paid $250-$300 to get mine redone. It came out nice but I still had to paint it. This was in 2001. Jim N.
I may have three items on your want list. For now I have found item number 10 which is basically the entire non-A/C heater control for a 1966 Skylark (the lever are different but that's about all). The cables on this are perfect! I really don't want to try and remove the cables on this unit because it is in such fine shape. I will want $35.00 for this item. I'll need to see the 1/4 extension trim piece (a photo) of what you need because I think I have that. The part for the steering box - is that the part with the splines in it that goes over the steering box shaft and then bolts to the steering column shaft with twio bolts? I'll take photos of the chrome that I have for the 67 Skylark shortly. Alan R. Broadbent 2700 Oklahoma Street West Melbourne FL 32904 (321) 427-3070 abroadbent@bellsouth.net
I got the shaft end for the column already sorry. I am interested in the cables for sure. the extention trim is just a little chrome around the tail lamp area on the rear of the 1/4. Its about 3 inches or so
Here's the moldings that I have. Let me know if any are what you are looking for - $25.00 each plus shipping or all four for $75.00. There is overspray on each of these and they need a thorough cleaning. I started to clean the one that you see in the front with "semichrome" polish as an example of how they will turn out - buffing will make these even better. Alan Alan
I have a steering column out of the 67 Skylark but thought the part at the end of the column was welded on there. I'll have to take a look again.... Alan
Here's a 66 67 Skylark steering column. Is the part anywhere on here? Just curious. I have several steering boxes and the parts that link the column together with the box. Alam
Item #6 just listed on ebay. I pair of decent used ones and an NOS dollar: :dollar: :dollar: ) right side by the same seller. Last time one of these sold for $510.00 if I remember correctly. Good luck bidding! NOS Link.........http://cgi.ebay.com/ebaymotors/NOS-...r_Truck_Parts_Accessories&hash=item27b15e35bd Pair link..........http://cgi.ebay.com/ebaymotors/Used...r_Truck_Parts_Accessories&hash=item27b15e3f1f
Call my friend Mike at the BuickBonery. I just dropped him off a pair of tail lamp extentions with chrome trim from a 67 special deluxe I parted out this morning. Those parts should be up to par for your resto. Mike @ (415) 359-3822. As far as the rest of the parts from the car go I don't want to separate the set of 4 wheel well trims, and I don't think the headlight doors are up to the quality that you are looking for. Adam
