68 GS 3:23 posi complete

Came out of 68 GS. Complete drum to drum.
Prefer pickup.
But will ship thru frieght.
$350.00

 

Does that fits a 70 gs convert? Did you take a look at the gears?

 

Interested, :TU:

 

Next in line

 

Yes, 68-70.

 

just and FYI - this rear uses different bearings unique to the 66-68 big block GS's and all motor sportwagons (and a few other GMs) and are getting quite a bit difficult to source

Here's a good post about it

http://v8buick.com/showthread.php?t=88264&highlight=68+sportwagon+bearing

 

Hey Jim,
Hope the couple other members here shed some light on what it will fit....I took cover off and they looked good....Thanks Steve

 

Hey Mike, I have you 2nd...Thanks Steve

 

Hey Don....3rd.....Thanks Steve

 

I was not sure what all it fits....thats why I listed as I got it.....Thanks Steve

 

Hey Alan, from what you said, my buddie had a hard time getting some for his 68 rear also....he found them but I cant remember the source...Thanks Steve

 

X2
When I got the original posi rear from my '68 GS rebuilt there was a '69 GS rear being rebuilt there at that same time. My 68 had 4 pinion and the '69 had 2. My 68 also had larger axles and I think it used a few other parts that were different than the '69 rear. And yes, parts were not easy to find for these rears.

 

I will be passing on this rear. I have just picked up his 3.42 posi

 

So I would be number 7 in line? Too late again

 

Steve, Put it in my pile.:laugh: :TU: :TU: Will send funds.

 

Hey Mike will add to the pile.....Thanks Steve