68 special deluxe 2 door post

Discussion in 'Car Part-Outs' started by painekiller, Feb 22, 2014.

  1. painekiller

    painekiller Well-Known Member

    no drivetrain, let me know what you need.
     
  2. dr

    dr Well-Known Member

    How far gone is the body? Thinking drag car for the future?
     
  3. nickwhite

    nickwhite Platinum Level Contributor

    Hey Doug, any vinyl top corners on the 68 ?? :TU:
     
  4. SteeveeDee

    SteeveeDee Orange Acres

    Frame? I'd be interested, depending on distance and shipping.
     
  5. 69buickgs400

    69buickgs400 1969 buick gs400

    Brake pedal return spring. Shipped to 17402
     
  6. painekiller

    painekiller Well-Known Member

    i dont think it would be worth saving, it needs front floor pans, trunk pan, cowl area, trunk filler panel and some 1/4 work.

    ---------- Post added at 08:42 AM ---------- Previous post was at 08:41 AM ----------

    yeah its got the vinyl top chrome all there, i will probably be removing it today. i will check condition.

    ---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------

    i will hopefully have the body off the frame today, the frame looks good but ill know better once the body is off. im a long way from you if you want to arrange shipping then thats up to you.

    ---------- Post added at 08:45 AM ---------- Previous post was at 08:44 AM ----------

    there is no return spring on the brake pedal
     
  7. dr

    dr Well-Known Member

    Thanks for reply, tell the clan I said Hi.
     
  8. Doworkson!

    Doworkson! I Like Torque!!!

    Any interior parts? Looking for a black interior to go in my 68 which used to be white. Looking for windlaces around windows, front and rear door palens and rear seat.
     
  9. 69GS400s

    69GS400s ...my own amusement ride!

    drivers big arm rest backing plate .. in addition to what I PM'd you about ?
     
  10. painekiller

    painekiller Well-Known Member

    it has complete interior. windlace is good, the panels arent very good, the back seat is junk
     
  11. painekiller

    painekiller Well-Known Member

    i have a few of the backing plates but i dont know if any of them are any better than what you have. heres a few pics of the fender louvers.
     

    Attached Files:

  12. nickwhite

    nickwhite Platinum Level Contributor

    Good Morning Doug, Any pics of the vinyl top corners? Thanks Nick White :TU:
     
  13. 69GS400s

    69GS400s ...my own amusement ride!

    Doug - thanks for the pics of the fender louvers but I will pass. Mine are mint except for the top edge which only has slight pitting .. I guess eventually I'll have to send them out.

    I'll buy you a beer in Columbus if you tell me how to remove them :rolleyes::laugh:
     
  14. painekiller

    painekiller Well-Known Member

    theres 4 speednuts on the back. i dont think you can remove them without removing the fenders or inner fenders.
     
  15. jjcus

    jjcus Well-Known Member

    Grille?
     
  16. 86capman

    86capman Vulgar Display of Power

    In line for Windlace. front & rear (upper) panels
    Also, Rear right quarter window?
    Sail Panels?
    Other things I can't directly recall right now.
    Thanks
     
  17. deluxe68

    deluxe68 Well-Known Member

    Doug,
    Interested in the metal clips that hooks onto and holds the rear interior side panels in place.
    if you have a dash housing and heater control with a good looking face plate that is better than mine for a non ac car, I would be interested in upgrading.
    From 1 to 10 & 10 being best, mine are a 4 and looks a little out of place for how new the rest of the interior is.
     
    Last edited: Jul 20, 2014
  18. deluxe68

    deluxe68 Well-Known Member

    Doug,
    Any parts left from this Feb. thread???
     
  19. 2erobrd

    2erobrd Active Member

    Howdy,

    I am looking for both rear wheelhouses for my 1969 skylark,

    do you have anything like that?

    thanks

    -Erick
     
  20. red68skylarkcon

    red68skylarkcon Well-Known Member

    Does it have '68 steering wheel, and if so what shape is it in?
     

Share This Page