'70 GS front wheell opening moulding

Discussion in 'Chassis restoration' started by la 65 gs, Dec 31, 2008.

  1. la 65 gs

    la 65 gs Well-Known Member

    This car has been apart far too long!
    I have two sets of wheel opening trim and don't remember which front ones are correct for this car. One pair of fronts is the same width where it attaches to the fender [approx. 1"] over the whole length of the molding.
    The other pair of fronts are narrower between the mounting points.
    Is one set more correct for a '70?
    Thanks,
    Loren
     
  2. BillMah52

    BillMah52 Well-Known Member

  3. la 65 gs

    la 65 gs Well-Known Member

    Thanks Bill!
    I thought it was the one without the scallops. So now I know which ones to put on the shelf and which for the car. Both sets came off '70 GS's ,so one car must have had them replaced somewhere along its life.

    Thanks again,
    Loren
     

Share This Page