Ok, Im ready to get rid of some stuff. I gutted the int of the lark. I have pretty much the complete inside of the car for sale for just 100.00 Seats... front bench is torn and worn but foam and springs are good Rear. is pretty nice. It looks like a re cover as I havent ever seen that pattern before. Door and side panels.. good shape and will clean up nice enough to be used for a decent driver. Head liner was scrap but I have all the bows, trim and moldings. both kick panels are in resuseable condition. rear side panels are good. windlace's are good. Map Light rear view mirror. theres a bag with all the screws and clips in it. Basicly everything from the inside of the car except the door handels window cranks and dash pad n Gages. I have all the ext trim for 100.00. This was once a vinyl top car.All the stainless from the sides and top, wheel well moldings. no drip rail. I am tossing in the 4 marker lights. All trim is driver quality or better. 1973 350/4 bbl engine. was running when pulled. needs a new pan gasket. also broke 2 bolts on the exhaust manifold pulling it out. I did a comp test before pulling it and had 150 on all 8 cyl. Pretty much complete.250.00 TH350 trans and stock converter was running and driving when pulled.recently replaced the rear seal. It did leak around the TV cable. 100.00 All the rear brake stuff. pads, springs ect. and e brake cables and pedel assmb. 25.00 Ralley rear view mirrors (set) 25.00. Un known gear single track rear end. Free for the taking. Big stuff need to be picked up or delivered. small stuff I will ship in USPS flat rate box. I take paypal, personal check, money order or cash. Pictures on request.
Ist up rally mirrors,...are these the sport mirrors for the doors youre talking about...if so..can I get pics.... thanks jerrold,,,
Interested in the rear E-brake stuff. What kinda shape are the cables and springs in? Does it include the hooks (hangers) for the cables ( basicly is it the "entire" e-brake setup?) I need pretty much all of it!! Thanks!
Interested in the map light rear view mirror only if the plastic portions on the mirror are in non brittle condition. Thanks:TU:
What color is the interior and where are you located? I would be interested in the seats, door panels and definately the Headliner bows. Thanks! Tom
Original rad? Looking for a clip for the coolant overflow hose. Attached to the rad., spring steel, usually just below the rad. ID tag.
I would be interested in the door locks as well as the trunk and glovebox locks if they have A and B code keys. Don't need the ignition.
Ive got some pics attached below. let me know if you need more. After viewing pics send request via PM. These are the outside rear View mirrors. Everything that was on the car goes with the lot. I cannot guarentee every part is there. 95% complete would be my guess. Pics below Int is Blue I am in N florida. would be glad to meet you along the way for fuel cost or you can come here and get it. I do have the 2 core rad I am not reusing. I will look for the clip. I will get a pic of this. Shipping may be expencive due to the size of the box to safely pack it for shipping. Rear sail panels were not in the car when I got it. the side panels, like along the side of the rear seat, go with the complete Int package,Sorry.
Wish you wasn't so far away... I am in Baltimore Maryland. "IF" you decide to separate the interior parts. I would be interested in the Front door panles and headliner bows. Please send me a PM should you decide to split up the package. Shipping would be to zip code 21219. Thanks... Good luck with your sale!! Tom
Balt is only about 14 hours away. Make a weekend out of it!!!! you can buy the package and I will send what ever parts you want from it. Bigger things like door panels cost more to ship. I would take them to a UPS store and have it packed and insured.
Thanks Briz. Im going to pass on the brake stuff for now until I can take stock of what I really need (which I think is just a few cables and hangers). If something changes I'll let ya know!
I checked the Rad. That clip is MIA Sorry. I have all the straight parts in a thick walled card board tube.I will take the wheel molding to the UPS store to be packed and Insured. I will PM with shipping total. Whats your zip? I wasnt going to pull those parts as I would have no way to open the doors or trunk. I will let you know if that changes.
I would like the rear. How far are you from Philadelphia? I may also be interested in the exterior trim if it is not already taken. Thanks! Lee Edit - I just checked your profile, for some reason I thought you were in Pa., not Fla. I'll have to pass on the rear....
