71 Qjet

Discussion in 'Parts for sale' started by VinMan, Sep 14, 2009.

  1. VinMan

    VinMan Well-Known Member

    I have a 71 Q-jet I purchased a few years ago from a board member, I believe I paid $150~ for it. The carb was then sent to John Osborne for a complete rebuild and tune which cost $264, this was in 2005.

    The QJet was on the last engine with the TA413 cam for what I estimate was about a year & around 1500~ miles until I found out the block had a crack.

    I now have a Holley on the new engine and I still have my numbers matching 70 QJet, so that's why this is for sale, no need for it.

    Here's what John did to it and the specs:
    Rebuild QJet, Install throttle shaft bushings, Carb kit, primary rods, control, vacuum hose, G secondary hanger, filter and plug

    Carb#: 7041540 MF
    0071

    Primary jets .077
    Primary rods - 48B
    Secondary rods - AU (.052)


    The price is $300 including shipping in the 48 states, outside of that you pay for freight.

    I am located in Northern California, the San Jose Bay Area.

    Here's a link to pictures

    http://s657.photobucket.com/albums/uu293/vinmanss/QJet For Sale/



    There is one member on this forum who I aswered a question he had in a PM and I said I had this carb for sale, I told him I would post it tonight in the for sale section and he has first dibs, but he needs to respond by the end of the day Monday. It is Donks82.

    After that it's whomever responds here first. Go ahead and respond if interested, dont wait for Donks82, I just wanted to put this in the add to comply by the rules.



    Thanks
    Vinman
     
  2. VinMan

    VinMan Well-Known Member

    With the overwhelming response to this add, more like....:sleep:

    I guess $300 is too high for a 71 Q-Jet modified by Mr Osborne and ready to bolt on......:Do No:

    I will re-list this at $250


    Thanks
     
  3. quicksabre

    quicksabre Well-Known Member

    PM sent. Interested in purchase.
     
  4. MYBUICKS

    MYBUICKS Well-Known Member

    put me next in line if still available
    Dennis
     
  5. VinMan

    VinMan Well-Known Member

    I just reponded to quicksabre on his PM. If that doesnt go through, then you're next in line dennis.

    Stay tuned....
     
  6. VinMan

    VinMan Well-Known Member

    quicksabre's friend contacted me with commitment to buy at $250, so this is done. If it falls through for any last minute issue, I will re-post.

    Just wanted to let anyone else interested know.

    Thanks
     
  7. MYBUICKS

    MYBUICKS Well-Known Member

    No need to re-post. Just let me know. I was next in line after Quicksabre.
    Dennis
     

Share This Page