Located in Fort Lauderdale. 72 Riv GS is rusty but has power bucket driver seat in fair condition, grille is gone, bumpers shot, some good stainless, heads still there, carb gone, probably has a posi but I won't pull it. 63 Lemans ragtop had a power top. Top motor and cylinders are still there. Thought maybe it could interchange to a skylartk if anyone needed it. Actual u-pull price plus shipping if you need anything. I'll go back in the A.M. -- Steve
72 Riv Hey Steve, Does it still have the side mouldings on both sides? If so, what shape are they in and what color? Thanks!
wildcat 62 -- Burgundy car, distinctly remember black side moldings since the black part was peeling out of one piece. Cheap U-pull prices if you want them. Car had not been hit. Pimpvw -- I imagine it probably has a posi, since it's a Riv GS, but maybe not. No way would I pull it. Could possibly arrange to have someone down here pull it if you are really desperate. -- Steve
Steve, Just get the center section and gears for someone who wants it. Should not take more than 1 hour to do it. That what it takes for me. Definitely charge for your time.
Riv parts Steve, I would definately be interested in the side mouldings off the 72. Let me know what you need on my end, but I could use them. Kris
Local yard here in FL just got in a 71-3 Riv. Should be in the yard this Sat, 5-13 or next. Email me direct GStage1@buickperformance.com I will try to get your parts but need your reply no later than 11pm on Friday, 5-12
Steve, looking for 1 or 2 sailpanel light caps... I have to remove the sailpanels to replace the rollers for the left 1/4 window and the cap will definately not survive when I take it off....
The console actually isn't in bad shape. Still there. Want it? Going back in the AM. Pulled one fairly nice black front floor mat -- not sure which side. Car had three horns and no wiring harness, which seems to indicate that it had a four-note set-up but someone pulled the trumpet before I got there. Only side trim that is good is passenger side front fender. All else is dented or destroyed. Want it? Going back in the AM. No good steel anywhere. Sailpanel caps are dry-rotted and ready to turn to dust at the least provocation. Anything else? -- Steve
Pass side moulding Steve-I'll gladly take it. It's one more nice one than I have now Thanks for the help!
Steve, How's the pass side fender on the '63 LeMans??? Am looking for a straighter example than the one on my "streetcar" project. My '63's rh fender is solid, but will need a ton of stud gun & dolly work in front of the wheel opening If what you're looking at is fairly nice, I could walk you through quickly pulling it. Thanks, Roger
how is fornt door panel ,specially driver side lower one? and is there passenger side mirror?please let me know
