72 Skylark body tub

Discussion in 'Car Part-Outs' started by newmexguy, Nov 8, 2016.

  1. newmexguy

    newmexguy Well-Known Member

    72 Skylark. Bare tub. Roof and top cowl were cut off by previous owner to fix a rusty olds 442.
    Remainder of firewall - $75
    Torque boxes at bottom of firewall $125
    Door shells, both need some work not rotted on bottoms. $100 ea.
    Rear quarters with outer wheelhouses, price not yet determined a lot of work to remove as well as the:
    Tulip panel
    Tail pan

    Loose or removable parts include:

    Steering column (for parts) $45
    All underdash a/c parts $50
    Auto brake pedal and bracket $25
    All remaining park brake parts - pedal, bracket, hardware and perhaps front cable $20
    Pair of rear bumper cushion pad uppers $20
    Rear window $25
    Rear window stainless trims $35
    Rear quarter inner door panels (4) $45 all
    Upper inner door panel metal rail passenger side $15
    Instrument cluster and good lower column cover $25 both Cluster is for parts.
    Taillight harness, appears uncut. $25
    Very ruff grille, $15
    (3) small seatbelts, tan, female. $15 all 3.

    Frame underneath tub is from another 70 oldsmobile. $200 bare.
     

    Attached Files:

  2. shadewolf

    shadewolf Well-Known Member

    Re: 72 Skiylark body tub

    Pictures of grille please.
     
  3. Rich Johns

    Rich Johns Platinum Level Contributor

  4. newmexguy

    newmexguy Well-Known Member

    shade wolf sent you a PM.

    RJ - these are pics of the package tray. Car had a dealer? installed vinyl roof, and sat with sand and silt in it for perhaps three decades. So tulip panel is not good but speaker areas are good, as well as metal between them and in front of the speakers where it is spot welded to the trunk divider.
     

    Attached Files:

  5. Rich Johns

    Rich Johns Platinum Level Contributor

    Thanks for the great pics.

    Yes, I only need the just the speaker hole metal stampings.

    The 70 GS 455 I am restoring for a customer here has had the inner speaker brace areas cutout for after market speakers at some point.

    I am doing a concours restoration on this GS 455 so I need some replacement original metal to butt weld back in to restore what was cut out of this car.

    Basically cut 1/2 inch or so around the 4 speaker mounting holes for each speaker hole.

    Are you OK to cut those areas out and mail it up to me ?

    Send me a direct email
    rich@purestockauto.com
     
  6. newmexguy

    newmexguy Well-Known Member

    RJ Will try to reach you again via email. Got a failure daemon the other day, must have mistyped a letter or two on silly smart phone.
     
  7. newmexguy

    newmexguy Well-Known Member

    RJ A few days behind. Speaker areas cut out and ready to ship. Dave S. dona ana NM.
     

    Attached Files:

  8. Rich Johns

    Rich Johns Platinum Level Contributor

  9. newmexguy

    newmexguy Well-Known Member

    Doors sold and shipped
    Rear speaker cut outs sold and shipped
     
  10. newmexguy

    newmexguy Well-Known Member

    Frame pulled out and cut into sections. Front horns, and perimeter rail sections available. Updated pics of body.
     

    Attached Files:

  11. 71gs3504sp

    71gs3504sp Well-Known Member

    Do you still have the rear window.
    Looking for one without any scratches.
    Shipped to PA 19090

    George
     

Share This Page