75/76 455 Block East Coast or MN area

Discussion in 'Parts wanted' started by gdbuick, Apr 12, 2006.

  1. gdbuick

    gdbuick Well-Known Member

    Looking for a good block to strap a girdle on. I have failed sonic checking on my two current blocks 71 & 74. I do have a good crank. Prefer North East Coast but I do have a shipment up coming from the MN area.

    Thanks
    Greg
     
  2. 65gs76limited

    65gs76limited Well-Known Member

    Greg,i have a running 75 Riviera. It's rough and rusty but complete.I'am in Cleveland,Oh.You can have the whole car for 650.00. Tom
     
  3. gdbuick

    gdbuick Well-Known Member

    Motor

    Wish you were closer Tom. If the car gets parted out let me know.

    Thanks
    Greg
     
  4. bmcmillan

    bmcmillan Dented Hood Tach

    455 motor

    Not sure where in MN your shipment is coming from.
    But I have a 1976 Buick Riviera 455.
    Bad news; a connecting rod went throught the oil pan.
    I don't know what is good, without tearing down the whole
    motor. But it is complete with the turbo 400 long shaft still bolted on.
    100.00 dollars for it.
     
  5. buickapollo455

    buickapollo455 Well-Known Member

    Minnesota 76 buick motor complete needs crank

    Have a complete motor in N Mpls , asking 250 for whole, you can pick up my place, have motor hoist, is on a roller cart now tucked away in corner. The crank was told to me to be bad i used a 73 in my car and never even turned it over , car was an owner that had no knowledge of buick motor oiling , and told he fried crank. if you want call me 612-522-9200 craig
     
  6. starper56

    starper56 starper56

  7. BrunoD

    BrunoD Looking for Fast Eddie

    gdbuick

    Hi,I have a NOS bare block.I want $800.00,and you can pick it up.I am on Long Island.If you are interested PM me.BrunoD.
     
  8. palbuick

    palbuick Well-Known Member

    Hi
    I still have a NOS short block, vintage 1973-76. Pistons rods, crank, cam berings. $ 1100.00
    Live just outside of Rockford Il. Pick up only.

    Jim Schilf
    palbuick
     
  9. 7 skylark 1

    7 skylark 1 Well-Known Member

    i have a 1241735 bare block. it's .030 already.it would need to be cleaned up again. i don't know what year it is. if you tell me how to check i will.
    $50.00 and it's yours. dave
     
  10. gdbuick

    gdbuick Well-Known Member

  11. gdbuick

    gdbuick Well-Known Member

    block year


    Hi Bruno,
    What year block is it?

    Thanks
    Greg
     
  12. 7 skylark 1

    7 skylark 1 Well-Known Member

    block serial number is on front face of block above the oil sending unit . 43Y25334. so i guess it's a 73 block.
     
    Last edited: Apr 17, 2006

Share This Page