A few questions for SPX users

Discussion in 'The Bench' started by kenny t, Dec 15, 2011.

  1. kenny t

    kenny t Gold Level Contributor

    What brand filter and what is the filter height that you are using ? Also , does your setup touch the hood at WOT ? Which hood do you have ?
     
    kenny t, Dec 15, 2011
    #1
  2. carmantx

    carmantx Never Surrender

    We run a 2" drop base with a K&N filter element, and a low profile top. Hood is a stock hood with the GS scoop section added. It's a tight fit.
     
    carmantx, Dec 15, 2011
    #2
  3. Rob Ross

    Rob Ross Well-Known Member

    How tall is your filter?
     
    Rob Ross, Dec 15, 2011
    #3
  4. kenny t

    kenny t Gold Level Contributor

    Hi Mark , who makes the 2" drop base ?
     
    kenny t, Dec 16, 2011
    #4
  5. sroys

    sroys Married to a Buick Girl!!

    They are the same ones used on early Vettes
     
    sroys, Dec 17, 2011
    #5
  6. carmantx

    carmantx Never Surrender

    i am not sure what filter or base we used. The base was a standard drop base after market piece. Currently, the nitrous plate is under the Carb, so there is not room for any air cleaner.
     
    carmantx, Dec 18, 2011
    #6

Share This Page