Hi guys, My car has an aftermarket set of buick valve covers, so it has neither the hose from the exhaust or the rubber one that goes from the valve cover to the breather. Couple of questions, I will need the metal bolt on attachment that the hose from the exhaust slides onto (at the manifold), I will neet the hose itself that goes from the exhaust to the air cleaner. And was thinking about having the valve cover drilled out so I can put the rubber gromlet in. What size hole, and what is that called that goes in the valve cover anyway, I know it is not the PCV cause thought that is in the back of the intake I thought.
Need to know what engine you have. The 350 and 455 heat stove risers are different. I have this info pictured on our site.
I think you can get the heat stove riser on Ebay. If you don't drive the car in cold weather....you really don't need it or the pre-heat hose. The hose is also available on Ebay. I can measure the grommet opening.
