I've used a few brands of sprayable filler and I am shocked at how pricey they have gotten.. along with everything else. Has anyone here used a brand called UPOL Sprayable Reface filler? What did you think of it? Does it compare to Glasurit or the Sikkens spray fillers? Thanks Bob
I used that brand a long time ago and it worked OK on some really pitted panels . Real hard to sand though . As far as comparing to the other brands I don't know I never used them .
I use omni brand its made by ppg and i also used ever coat they both spray nice with a 1.7 or 2.0 tip at cooler temps on hot days they take more effort to apply.They cost around 70 to 90 dollars a gallon. glasurit cost more and also has a short shelf life i have gotten it from my paint store and it was already hard in the can
UPOL is all I use. Not a professional but I have found it easy to spray using a 1.8 tip. As far as sanding I have had no problem with sanding and find it easy to sand. I've used the reducer on some occasions to ease the application. Rod
I did the 69 GS350 with Reface from U-pol, the car came out pretty good, the sanding was bitchin'. Four coats before all the low spots were taken care of. :TU:
They all sand the same..it is a polyester filler...same chemistry in all of them...Glasurit...Spies....
