Hi, I just got done chatting with another board member who tried to fit these under a stock fender well. They don't work. These tires are almost 2" taller and over 1/2" wider than the 325/50R15 DradRadials. After much "testing", this is the widest tire that I was able to fit up under there. And even then, there was a bit of trimming of the top of the fender well to not have any rubbing issues. Backspacing is also VERY important. Out cars need a 15x10 rim with 5.5" to 5.625" of backspacing to put these big tires on. So please, check on a tires dimensions; diameter, tread width and SECTION WIDTH. That's one of the biggies. The 325/50 DrgRadial has a 12.4" section width and that's about the max that will fit under there without big problems. And that's with the rim centered in the fender well. Just a helpful hint. Phil
This is the size that looks interesting to me to fill up the wheel wells, and tame the gear ratio some: P295/65R15 8.0 - 10.0 rim 12.4 on 8.5 section width on rim size 29.6 diameter
Not sure if these are released yet, but M/T's new Drag Radial looks good to me! Here are the sizes: Part# Size Equivalent 3752R P235/60R15 26x9.50-15 3753R P275/50R15 26x11.50-15 3754R P275/60R15 28x11.50-15 3757R P325/50R15 28x13.50-15 3762R P295/65R15 30x12.50-15 3763R P315/60R15 30x13.50-15 3793R P255/50R16 26x10.50-16 3743R P275/40R17 26x11.50-17