Brake Lines to Master Cylinder

Discussion in 'Chassis restoration' started by 71Stage1Conv4sp, Oct 13, 2005.

  1. 71Stage1Conv4sp

    71Stage1Conv4sp Well-Known Member

    I need a clear picture of the mounting clip that goes on the right side of the booster. I need a picture of the unit installed, not just the clip.The pictures I have are not too clear.

    I had the booster replated this week, looks pretty good. It does not look as nice as Tim's, but, it will do.

    Thanks.

    Len
     
  2. Steve Craig

    Steve Craig Gold Level Contributor

    My '71 was originally manual drums. Now we have power disc/drum.
    This clip was a real tough nut to find!
    I've seen a few rebuilt boosters without the drilled hole for this clip.
     
  3. 71Stage1Conv4sp

    71Stage1Conv4sp Well-Known Member

    Steve;

    Thanks for the quick response. Fortunately, I found one of my photos (over 1000 digital photos) showing me what I needed. I had the clip and the rubber bushings and its all installed. Last step for the brakes are the front calipers and new rotors; otherwise, the brake system is completely rebuilt.

    Len
     
  4. TimR

    TimR Nutcase at large

    Pictures! We need pictures!!! :beer

    Tim
     

Share This Page