KB 350 deep oil pan with pick up tube and pan bolts SOLD KB 350 .030 over pistons on GM rods. these are the shallow dish pistons like came in the 1970 GS. (SOLD) aluminum rocker arms $$25 + shipping KB main studs with washers and nuts (SOLD) KB 3/8 push rods $50 shipped KB Mark2 cam and lifters. lifters were kept in order. Sold KB head bolts $45 shipped headers need some work they have some dents on the lower tubes and 1 has some small holes by the collector (SOLD) Mallory dist. no vacuum advance. new pick up. $250 shipped TA aluminum intake SOLD 71 72 power steering pump assy $60 shipped HEI 350 distributor $40 shipped heads $100 + shipping prefer pick up crank .010 under on mains SOLD block .030 over. I cylinder had some rust but the piston pushed out ok so im guessing it would be ok with a hone. $50 pick up only all shipping is to lower 48. shipping anywhere else and buyer pays actual shipping. paypal add 3%.
You have any specs on the cam? Mite be interested in the headers depending on shipping. Zip is 66431 thanks
IN line for the old headers and main studs if you still have them. I would have them shipped with the engine Gary P. is building me. Will send a PM Doug.
Dad posted the cam specs. are you interested? the headers will be expensive to ship and I prefer they be picked up.
Inline for pistons and rods. All documentation I've seen for the KB pistons are that they are cast. Here is the link to the Team Buick site for documentation, it discusses the pistons midway down the page. http://www.teambuick.com/reference/library/350_ken_bell.php